Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PBM200
Product Description:Profibus Master Module
Communication interface:One (1) RS232 Service port; One (1) Profibus Master Port
Communication protocol:ProfiBus
No. of supported DP slave:125
Data rates:All standard data rates
Input data:244 Bytes
Output data:244 Bytes
Current draw:450mA @ 5VDC
Product Lifecycle Status:Discontinued/Obsolete
Operating temperature:0 to 60 degrees Celsius
Product Description:Analog input module
Number of Inputs:8
No of Channels:Eight (8) analog input
Input Type:Single-Ended
Analog input signal:Analog input signal
LED Indicators:2 (The "OK" and the "INT PWR" LED
Analog input resolution:12 bits
Voltage Type:Unipolar or Bipolar
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL742
Product Description:Discrete Output Module
Number of Points:16 Outputs
Number of groups:2
Point to Point Isolation:None
Series:Versamax
Part Number:IC200MDL241
Description:Discrete Input Module
Operating Voltage:240 Volts AC
Backplane Current Rating:110 milliamps
Maximum Response Time (On):1 Cycle
Built-in Power:Yes
Number of Inputs:16 Discrete Inputs
Group Isolation:Yes
ON state Voltage:15-30 VDC
Filter time:0 ms, 1.0 ms, 7.0ms
OFF state voltage:0-5 VDC
Backplane Current Consumption:5 Volts, 50 milliamps
OFF state current:0-0.5 mA
On-state current:2.0 - 5.5 mA
Product type:Discrete Input Module
No. of input groups:Four (4)
Number of Points:32 Inputs
Input signal, nominal:24 VDC
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL244
Application:Versamax I/O and Control System
Operating Voltage:240 Volts AC
Built-in Power:Yes
Number of Inputs:8 Discrete Inputs
Channel Isolation:Yes
Location:Versamax I/O Carrier
Series:Versamax
Part Number:IC200CPU001
Description:Configurable CPU
Product type:CPU module
Serial Ports:2
User Memory:34K Bytes
Product Description:Central Processing Unit (CPU)
Floating point math:Supported
Discrete Internal Bits:1024 points
Discrete Inputs:2048 points
Discrete Temporary Bits:256 points
Discrete Outputs:2048 points
Boolean Execution Speed:1.8 ms / K
Type of Memory Storage:RAM and Flash
Modbus Registers:32
Real-Time Clock Accuracy:100 ppm
Global Discrete Bits:1280 points
Floating Point data:Supported
Battery Backed RTC:Installed
Override functions:Supported
Series:VersaMax
Product Type:Compact box-style I/O carrier
No. of Terminals:36 terminal
Single-Wire Cross Section:0.36 mm2 to 2.1 mm2
Two-Wire Cross Section:Up to 0.86 mm2
Current rating per point:2 A
Voltage rating:0-264 VAC
Current per Point:2 Amps
Current rating per each power terminal:8A
Current rating, per point:2 Amperes
Voltage supply, max:264 VAC
Current rating per ground and power segment:8 Amperes
Maximum Voltage per Point;264 Volts AC
Transient voltage, max:300 VAC
Series:Field Control
Manufacturer:GE Fanuc
Part Number:IC670CHS001
Type of Component:I/O Base, Barrier Style
Number of Terminals:37
Product Description:I/O Carrier Module
Carrier module terminals:Barrier style
Terminal Torque:8 pounds on an inch
No. of Terminals:37 terminals
Insulation rating:90 Degree Celsius
Tightening torque:8 in-lb.
Mounting:DIN Rail / Panel mount
Series:Versamax
Part Number:IC200MDL643
Product Description:Discrete Input Module
Number of Points:16 Inputs
Number of groups:2
Input Impedance:2.4K Ohms
Series:RX3i PacSystem
Part Number:IC695CHS012
Compatibility:RX3i PACSystem, Series 90-30 and option modules
Number of Slots:12
Backplane Support:Supports both PCI and High Speed Serial
How Swap Support:Yes
Internal Power, 5VDC:240 milliamps
Internal Power, 3.3 VDC:600 milliamps
Mounting:Rack
Type:Universal backplane
Input:+24 Volts
Backplane Orientation:Horizontal
Series:VersaMax
Part Number:IC200ALG331
Output signal, nominal:4-20 mA; +/- 10 VDC
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
Backplane current:10 mA @ 5VDC; 115 mA @ 3.3 V
Configurable output default:Hold Last State; 0 (configurable)
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
Series:Series 90-30
Part Number:IC693CPU363
User memory:240K Bytes
CPU type:Single slot CPU module
Register memory:240 kilobytes
Serial port:RS-485 (via power supply
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Serial ports:3
Clock speed:25 Megahertz
Microprocessor:80386EX
Discrete inputs:2048
Discrete outputs:2048
Type of Memory Storage:RAM and Flash
ANALOG INPUT/OUTPUT MODULE
I/O PACK
FOR A GE SPEEDTRONIC MKVIE
GAS TURBINE CONTROL
Ambient Temperature Range:-40 to 158°F
Analog Transmitter Power:22.8 VDC
Input Voltage: 24V DC nominal
Power Consumption: 1.5 W
Current Draw:24V DC: 90 mA
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% (non-condensing)
Nominal: 24 V DC
Maximum: 32 V DC
Maximum per output: 0.5 A
Total current limit: 6 A
Operating Temperature Range: -30°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH (non-condensing)
Series:Series 90-30
Part Number:IC693MDL645
Module type:Positive / Negative Discrete input
Input Voltage Range:0-30 VDC
Nominal Input voltage:24VDC
Input Current (mA):7 mA
Number of points:Sixteen (16)
Module width:Single (1) slot
Module type:Discrete input
Power Type:DC
Input Voltage Range:0-30 VDC
Input Current (mA):7
Number of points:16
Response Time (ms):7 ms on, 7 ms off
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PCM301
Memory Backup:Lithium Battery provided
Internal Power:425 mA at 5 VDC
Slot width:Single slot
Number of LED lights:3
Battery Backed RAM:192 K or EPROM option
Total memory:192K
Communication protocol:Modbus; CCM
Internal Power:425 mA at 5 VDC
Number of LED lights:3
Total memory:192K
Mounting location:CPU baseplate only
MegaBasic memory:47K
LED indicators:OK; US1 and US2
Part Number:IC693PWR330
Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485
No. of Outputs:Three (3)
Nominal Rated Voltage:120/240 VAC or 125 VDC
Input Voltage Range, AC:85 to 264 VAC
Input Voltage Range, DC:100 to 300 VDC
Description:Power supply device
Voltage:120/240 Volts AC , 125 VDC
Power:30 watts
Communication:RS 485
Standards:CE, UL
Number of connection terminals:6
Manufacturer:GE Fanuc
Part Number:IC695NIU001-ADAD
Module Type:Network Interface
Number of Slots:1 (single slot)
Backplane Support:Dual: RX3i PCI and 90-30 Serial
Series:Series 90-30
Part Number:IC693BEM331
Current consumption:<300mA at +5V DC
Number of LEDs:2 (OK and COMM OK)
Power Supply:5 V DC from the Series 90-30 Backplane
Compatible Series 6 controllers:IC660CBB902F/903F
Number of I/Os:31 Maximum
Maximum Data Rate:128 bytes
IP rating:IP 20
IC695NIU001-ACAD
Module Type:Network Interface
Number of Slots:1 (single slot)
Backplane Support:Dual: RX3i PCI and 90-30 Serial
Communication Ports:(2) RS-232 and RS-485
Series:PACSystem RX3i
Manufacturer:GE Fanuc
Part Number:IC694MDL655
Type:Input module
No of Channels:Thirty-Two (32)
No. of groups:Four (4)
Inputs:32
Logic:Positive/Negative
Input voltage range:0-30 VDC
Rated Voltage:48V DC
Input signal range:0-30 VDC
Input current:7.0 mA at rated voltage
Input Voltage Range:0-60V DC
Nominal Input voltage:24 VDC
Input Current:1.7 mA at 48V DC
Input current:7 mA per channel
Off–state Voltage:0-5 VDC
Cable Length:30 m
On State Voltage:11.5 - 30 VDC
Isolation:250 V AC
On state current:3.2 mA
Off state current:1.1 mA
On response time, typical:2 ms
Off response time, maximum:2 ms
Product Lifecycle Status:Active
Input Voltage Range 24V DC to 48V DC
Output voltages are typically 5V DC, 12V DC
MicroNet TMR systems
Operating: -20°C to +60°C
Storage: -40°C to +85°C
Humidity: Up to 95% non-condensing
