ALL MANUFACTURERS

3300 NSv Proximity Probes

330908 3300 NSv Probe
3/8-24 UNF thread,without armor
Minimum unthreaded length: 3.9 in
Minimum case length: 7.1 in
05 0.5 meter (20 in)
01Miniature coaxial ClickLoc 
connectorwith connector protector, standardcable
00 Not required

Accelerometers

01 ¼-28 to M6 x 1.00 Stainless Steel
00 100 mV/g ± 20% (10.2 mV/m/s^2±20%)
00 No Approvals

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 1.0 in
Minimum case length: 2.7 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Reverse Mount Probe

05 0.5 meter (1.6 feet)
02 Miniature ClickLoc coaxialconnector
01 CSA, ATEX, IECEx  Approvals
3300 XL 8 mm Reverse Mount Probes

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 2.4 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 NSv Proximity Probes

330905 3300 NSv Probe
M10X1 thread,without armor
Minimum unthreaded length:0 mm
Minimum length: 180 mm
05 0.5 meter (20 in)
02 Miniature coaxial ClickLoc connector
standard cable
05 Multiple Approvals

Digital Input Module

Type: Digital Input Module
Channels: 40 isolated input channels
Input Voltage: Nominal 24 VDC (range: 18–32 VDC)
Input Current: 6 mA per channel typical
Input Impedance: Approx. 4 kΩ
Logic Thresholds:
Logic '1': ≥15 V
Logic '0': ≤5 V

Trusted I/O and Communication Module

SHIELD FOR I/O AND 
COMMUNICATION MODULE 1SLOT
Trusted Shield Single Slot Width
Input Voltage:24V DC
Power Consumption: 8W 
Digital Inputs: 16–32 channels

Remote Expansion Cable

Full Trusted Controller Capability
100-240 Vac Input
Portable wheeled flight case
Simulation of 60 Field Signals
Pre-wired Dual Ethernet (point to point and hub)
Serial Comms wired to terminals
Configured for Companion Slot DI, AI and DO Modules

Trusted I/O SmartSlot Cable

Model Number: TC-501-02-6M5
Type: I/O SmartSlot Cable
Configuration: Typically used for internal connections
Channels: Supports 40 channels
Termination: Connects Trusted® I/O modules 
to FTAs or VFTAs

Panel Mount Operator Advisor Panel (OPADP)

51305776100
INTERFACE MODULE ASSEMBLY
ADAPTER UNIT
OEP/IKB

Digital Input 24V IOTA Redundant

Galvanic isolation
Open wire detectio
Optional redundancy
Direct / Reverse Input Indication
Supplies Non-incendive field power
Internal or external field power selection
Extensive internal diagnostics for data integrity

HART Analog Output Module

Input Voltage:100–240 VAC (universal) 
Output Voltage:24 VDC (adjustable up to ~27 V)
Output Current:20 A continuous
Protections:Overcurrent, overvoltage, short-circuit
Operating Temperature Range:–25 °C to +70 °C

Safety Manager System Module

Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA

Electronic Earth Leakage Detector

Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA
Max. output current: 2 A
Isolation 1500 V DC / 1000 V AC
Initial contact resistance: 30 mW
Operating temperature: -5°C-+50°C (23°F-+122°F)
Max. output voltage: 36 V DC / 30 V AC

DESK OPERATOR ENTRY PANEL

TPDSOEP1100
51402497-200
TDC 3000 
Operator Keyboard
DESK OPERATOR ENTRY PANEL

FTA interconnection cable

Direct connection between two 
FS-CP series process controllers
20meters long
Shielded twisted pair design
Easy to install and use
Hot-pluggable

Digital input module

DIGITAL INPUT MODULE 
LINE MONITORED W/ FAULT MONITOR
16 CHANNELS
Functional tests of the various trip levels applied
Channel independence
Monitoring of supply voltage to input devices
Earth connection
Used supply voltages

Digital I/O module

Channels:Typically 16 I/O 
Output Types:Digital(0–10 VDC, 4–20 mA)
Analog Resolution:AI: 16‑bit; AO: 13‑bit
Power Supply:24 V DC nominal
Power Isolation:Galvanic isolation, reverse protection
Operating Temp:–40 °C to +70 °C
Enclosure / Rating:Up to IP66

I/O Module

Channels:Typically 16 I/O 
Output Types:Analog (0–10 VDC, 4–20 mA)
Analog Resolution:AI: 16‑bit; AO: 13‑bit
Power Supply:24 V DC nominal
Power Isolation:Galvanic isolation, reverse protection
Operating Temp:–40 °C to +70 °C
Enclosure / Rating:Up to IP66

Multi-Mode Fiber Optic Module

Medium: Multimode Dielectric Fiber 62.5/125
Wavelength:1300 nm
Maximum:Distance 2 km (1 mile)
Connector:MT-RJ
Voltage:3.3 V
Temperature Industrial:-40 C to +85 C (-40 F to +185 F)

Power Distribution Cable

Approvals: UL, CSA
Type: SAB 2040707
CC600 7 × 0.75 mm2
Length: 2.45 m
Type: 8 pole, pin header
Weidmuller: BLC 5.08/8 BR
Pins: Weidmuller: DFFC 0.5 - 1.0 SN E

Power supply unit

Input Voltage Range:85–264 VAC or 120–370 VDC
Input Frequency:47–63 Hz
Output Voltage:24 VDC
Output Current:Up to 16 A
Efficiency:94–95 % at full load
Protection Class:IP20
Operating Temperature:–25 °C to +55 °C

Battery and Key Switch Module

Product Type : Battery and Key Switch Module
Relative humidity: 10—95% (non condensing)
Approvals: CE, TUV, UL, CSA, FM
24 V supply voltage: 24 Vdc –15%—+30%
24 V supply current: max. 20 mA
5 VR supply voltage: 5 Vdc ± 10%
5 VR supply current: max. 10 mA
Output supply voltage: 14—31 Vdc
Output resistance: approx. 2 × 1.1 kΩ (parallel)

Power Distribution Board

Connectors:4‑pin action‑pin header
Input Voltage:From controller chassis (5 VDC rails)
Mounting:DIN‑rail (TS32/TS35×7.5 mm)
Operating Temp:–40 °C to +70 °C
Humidity:Up to 95% RH, non‑condensing