ALL MANUFACTURERS

Inverter power board

DC Link Voltage Range: 380–525V/690V DC
Current Capacity:50–500 kW
Switching Components:high-power IGBT module
Gate Driver Outputs: 2–16 kHz
Isolation: 2.5 kV
Protocol Support:24V DC signals
Temperature: -10°C to +80°C 
Humidity: <95% RH non-condensing

EXPANSION MODULE

EXPANSION MODULE
CONTROL BOARD MODULE
ZCU-14 PACKED CONTROL UNIT
REPLACES OBS MODEL 3AXD50000005164

SPAREPART KIT IGBT MODULE 900A

Voltage Class: 1200V
Continuous: 900A
Continuous: 900A
Switching Frequency: Optimized for ≤3–8 kHz
Conduction Losses: 1.8–2.5V
Isolation Voltage: ≥3000 V
Thermal Resistance:0.03–0.07 K/W
operating temperature: -40°C to +125°C

IGBT MODULE

DC Link:1200V
Continuous: 1400A
Pulsed Current: 2000–2800A
Frequency: ≤5 kHz typical 
Max. withstand voltage of 1800V
Typical Motor Load: 500–2000 HP induction motors

IGBT MODULE

Voltage Class:1200V
Continuous Current : 650A
Maximum Current: Up to 1300A
Collector-Emitter Saturation Voltage : 2.0–3.0V
Isolation: ≥2500 V DC
Thermal Resistance <0.1°C/W
Voltage: +15V/-8V gate control 
Operating Temperature: -40°C to +125°C

IGBT MODULE

Voltage Class: 1200V, 1700V
Continuous Current: 1400A
Pulsed Current : 1400A
Saturation Voltage:1.5–3.0V
Isolation Voltage: ≥ 2.5 kV
Operating Voltage: 15–25V DC
Turn-on/off voltage: +/-15V gate control

Handheld Digital Multimeter

DBV / dBm measurement
1 μV resolution in DC mV range
Current measurement 20 A 
(30 seconds momentary, 10 A continuous)
Peak capture function to record transients as fast as 250 μs
Continuity / Conductance / Capacitance
Resistance and continuity
Duty cycle & pulse width measurement
Min / Max / Average with Time Stamp to record signal fluctuations
Real time and elapsed time modes
CAT III 1000 V / CAT IV 600 V safety rated

Processor Module

PROCESSOR MODULE
FIELD CONTROL UNIT
NO EXPLOSION PROTECTION
BASIC TYPE
TWO ETHERNET BUS PORTS
LED INDICATORS
S1 SERIES

Pulse Input Module

Number of inputchannels:8, isolated channels 
Input frequency :0 to 10 kHz
Minimum input pulse width:40 µs 
Pull-up resistance:68 kΩ (12 V DC or 24 V DC)
Filter:Filter for eliminating chattering can be set
Data update period:2 ms 

ESB Bus Coupler Module

EC401 ESB Bus Coupler Module 
5 Standard type with no explosion protection
E Standard type with explosion protection
0 Basic type
1 With ISA Standard G3 option 
Function: ESB bus interface function
Number of connectable units: Max. 9 units (*1)
Transmission speed: 128 Mbps
Transmission distance: Max. 10 m
Current consumption: 0.5 A

ESB Bus Coupler Module

EC402 ESB Bus Coupler Module
5 Standard type with no explosion protection
E Standard type with explosion protection
0 Basic type
1 With ISA Standard G3 option 

Single Acting Reverse Relay

Actuator Compatibility:spring-return actuators
Supply Pressure Range: 3–30 psi
Input Signal: 4–20 mA
Port Sizes: 1/4" NPT or G1/4 threaded ports
Temperature Range: -40°C to +85°C (-40°F to +185°F)

FieldMonitor External Transducer I/O Module

I/O MOUDULE
W/ TRANSDUCER
2-WIRE INTERFACE

I/O Pack processor board

Processor Type:Mark VI 
Backplane Power: +5 VDC
Analog: ±10 V, 4–20 mA
Digital: 24 V DC
Processing Speed: 100–200 MHz 
Non-Volatile Memory (Flash):16–64 MB

Safe loop-monitored digital output module

Ability to de-energizel 
Ability to de-energize via secondary meansl 
Cross talk between outputsl 
Function of the suppression diodesl 
Lead breakage in the (external) output wiringl 
Short circuit of the outputs

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required

Velomitor CT

Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%.
FrequencyResponse:3.0 Hz to 900 Hz (180 to 54,000cpm) ±1.0 dB
TemperatureSensitivity:-8% to +5% typical over theoperating temperature range
TransverseResponse:Less than 5% of the axialsensitivity.
Output BiasVoltage:10.1 Vdc ± 1.0 Vdc, Pin Areferenced to Pin B 

3300 NSv Proximity Probes

330901 3300 NSv Probe
1/4-28 UNF thread,without armor
10 1.0 meter (39 in)
01Miniature coaxial ClickLoc connectorwith 
connector protector, standardcable
05 Multiple Approvals

Analog Input Module

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum reverse field voltage:– 0.6 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)

Digital Input Module

Points:32, commoned
Nominal input voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum input voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Input delay:<10 ms, On to Off or Off to On
ADC scan time:<1 ms for all 32 points

Analog Output Module

Type:TMR
Resolution:12 bits
Diagnostic:Forced-switch diagnostic (FSD)
Points:4, commoned-return
Output current range:4–20 mA output, controlled
External loop power:32 V DC, maximum24 V DC, nominal

Digital Output Module

Points:16, commoned
Nominal output voltage:24 VDC
Specified operational voltage range:15 to 30 VDC
Absolute maximum output voltage:33 VDC
Absolute maximum reverse input voltage:– 0.6 VDC
Leakage to load (Off state):<1 mA
Diagnostic glitch duration <2 ms, maximum:500 Ps, typical
On state voltage drop:<1.0 VDC @ 1.5 A

Interconnection Cable

Length:10 meters
Shielding:Dual/triple shielding 
Wire Gauge:22-24 AWG 
Voltage Rating:300V AC/DC 

Fieldbus Communication Interface

CI810B AF100 Fieldbus Communication Interface
2*AF100 Twisted Pair Modems.
Including:
1 pce Power Supply Connector 3BSC840098R1
1 pce TB807 Modulebus Terminator 3BSE008538R1
2 pcs Terminal Blocks 3BSC840098R1
The basic system software version 1.5 loaded.
AF100 Connector 3BSC840105R1