
Digital Input Module
16-channel, module isolation
6 mA ± 20 %
24 V DC +20 % / -10 %
10 mA or greater
24 V DC +20 % / -10 %
Current capacity: 200 mA
30.0 V DC
40 ms maximum
2 kV AC between input signal and system for 1 minute
16-input line collectivelyconnected
Digital Input Module
16-channel, module isolation
24 V DC
1 V maximum
24 V DC, 3.4 A minimum
24 V DC + 20 % / -10 %
1.6 mA
0.2 A/output line (3.2 A in total output line) (*3) (*5)
120 to 685 Ω (*6
2 kV AC between output signal lines and system for 1 minute, 16-point input linescollectively connected (negative lines)
Digital Input Module
16-channel module isolation
6 mA ± 20 %
24 V DC +20 % / -10 %
Current capacity: 200 mA
24 V DC +20 % / -10 %
10 mA or greater
30.0 V DC
40 ms maximum
2 kV AC between input signal and system for 1 minute
16-input line collectivelyconnected
290 mA maximum (5 V DC)140 mA
maximum (24 V DC)
processor module
Voltage, Current, Thermocouple
Input Range:
Voltage: ±100mV to ±10V, Current: 4-20mA
Output Range:
Voltage: 0-10V, Current: 4-20mA
Accuracy: ±0.1% of full scale
Response Time: ≤ 250 ms
Power Supply: 24V DC
Isolation Voltage: 1500V AC
Operating Temperature: -10°C to +55°C
Pulse Input Module
8, isolated channels
0 to 10 kHz
500 V AC, for 1 minute
500 V AC, for 1 minute
40 µs
68 kΩ (12 V DC or 24 V DC)
300 mA (5 V DC),
400 mA (24 V DC)
ESB Bus Interface Slave Module
4 to 20 mA
16, isolated, standard switch-overresponse in redundant configuration
Between output and system: 1500 V AC, for 1 minute
0 to 750 Ω
Less than 0.65 mA
±48 µA
±16 µA/10 ˚C
230 mA (5 V DC), 540 mA (24 V DC)
Power Supply Module
Power Supply Module
Two modules in case of
dual-redundant configuration.
Power supply to the I/O modules
and supply power to the transmitters
BUS INTERFACE MASTER MODULE
16-Pointor8-Poin
KS Cable Interface Adapter
for Analog 16-channel
with ISA Standard G3 option
Connecting with AEA4D
Connectingwith MUB,TE16
Proximity Probe Housing Assemblies
Threaded ports for conduit connections
A probe sleeve of optional lengthl O-rings
A reverse mount proximity probe
A thread seall Optional conduit fittings
An optional standoff adapter
Eddy Current Sensor
2 V/mm ≤ ±1.5% max
Approx. 5.5 mm
±4.0 mm
2,500 m/s
-35 to 175°C
200°C
-0.3%/100°K Zero Point
ANALOG INPUT MODULE
INPUT MODULE
ANALOG
SIMATIC S5
FOR S5-90U/-95U/-100U
ET 100U
ET 200U
4 INPUTS
0-10 V
ECT SIGNAL ISOLATER
ECT420MA2X420MA24DCTXDIN
ECT SIGNAL ISOLATER
CONVERTER
SPLITTER
INPUT
4 - 20MA
OUTPUT
2X4 - 20MA
24 VDC
4 WIRE
DIN RAIL MOUNTING
SCREW TERMINALS
pulse width modulation module
2 pulse-width modulated output channels
2 shielded DSub connectors
for output channels
LED (green) per output
Choice of high-power or TTL output level
Monitoring of the load current
Monitoring of the external supply voltage
Monitoring of the internal temperature
Analog In/Output Module
2 input channels
for incremental and SSI encoders
Full 32 bit counter
2 analog outputs (14 bit)
4 fast digital input channels for initiator and trigger
Position measurement / position storage can be initiated via triggers
Virtual for use in applications:
zero pulse, speed, etc.
Synchronization via SYNC/PreSYNC
Operator Panel
Industrial Processor at up to 433 MHz
Priority scheduled Multitasking
256 MB RAM
512 kB remanent memory (Retain)
64 MB internal memory device 1)
CompactFlash card slot for removable media
Front side PC-Card slot
2x Ethernet 10/100 Mbit/s
CONTROL BOARD
4 channels (0-20mA, 4-20mA)
8 channels
RS-485, Ethernet, Modbus
24V DC
-20°C to +60°C