ALL MANUFACTURERS

Interconnect Cable

2-conductor 18 AWG twisted
shielded cable with right angle 
2-socket plug at one end
terminallugs at the other end
Used with monitors and with
21128 Velocity TransducerHousing

Armoured Extension Cable

84661-35 
22 AWG (0.5 mm²)
Armoured Extension Cable

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 3.0 in
Minimum case length: 6.0 in
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector 
with connectorprotector, standard cable
05 CSA, ATEX, IECEx  Approvals

Velomitor CT Velocity Transducer

1 2 Plate Stud 3/8-in 24 to M8x1
0 0 MIL-C-5015 connection interface
0 1 through0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)

Velomitor Piezo-velocity Sensors

01 1/2-20 UNF
CN Multiple approvals (CSA, ATEX)
Velomitor Piezo-velocity Sensor

ControlLogix Discrete output module

Outputs:16-Points
Module Type:Digital AC Output Module
Voltage:120-140 Volts AC
No. of Outputs Sixteen (16) mechanically fused
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Backplane Current at 5 Volts:400 mA

Generic Servo Interface Module

Series:ControlLogix
Module Type:Generic Servo Interface Module
Axes per Module:8
Axes per Controller:32
Backplane Current (5Volts):760 milliamps
Backplane Current (24Volts):2.5 milliamps
Power Dissipation:6.2 Watts
SERCOS Data Rate:4 or 8 Megabits-Second
Current Draw (5.1 Volts):1.2 amps
Thermal Dissipation:21.2 BTU-hour
Isolation Voltage:50 Volts Continuous

power block

SINAMICS 
Replacement power block 
for 675-1080 V DC 120 A

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULES 
INPUT: 600 V DC 
OUTPUT: 3-PH 400 V, 
210 A FRAME SIZE: CHASSIS 
INTERNAL AIR COOLING SUPPORT 
OF THE EXTENDED SAFETY 
INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

power block

SINAMICS 
replacement power block 
for 510-750 V DC
380 A Motor Module 
3 phases painted modules 
and nickel-plated busbars

ACTIVE LINE MODULE

SINAMICS S120 
ACTIVE LINE MODULE 
INPUT: 3-PH380-480V, 50/60HZ 
OUTPUT: 600 V DC, 549 A, 
300KW 
INTERNAL AIR COOLING INCL
DRIVE-CLIQCABLE

MPC4 machinery protection card

Number of inputs : 4 per MPC4 card
DC range : 0 to +20 V or 0 to −20 V
AC range : ±10 V max.
Common mode voltage range : −50 to +50 VC
MRR : >60 dB at 50 Hz
Crosstalk : −72 dB
Input impedance : 200 kΩ
DC signals : 0 to 25 mA
AC signals : ±8 mA max

4 Channel Relay Output Module

Channel-to-Channel: 1500 VAC
Field-to-System: Reinforced isolation :2500 VAC
Per Channel: 1–2 W 
Total: ≤ 8 W 
Operating Temperature: -40°C to +70°C (industrial-grade)
Storage Temperature: -50°C to +85°C
Humidity: 0–95% (non-condensing)

SINAMICS Control unit

The Power Module:DC 24 V
External power supply:DC 20 ... 29 V
Max. power consumption:2.00 A
Power loss 12.00 W
Number:2
Output (resistive load):DC 30 V, 0.5 A
Number 15
Switching level: 0→1 11 V
Switching level: 1→0 5 V

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:205 Amps, 110kW ND, 90kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:205 Amps, 110kW ND, 90kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:170 Amps, 90kW ND, 75kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:170 Amps, 90kW ND, 75kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
M jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:140 Amps, 75kW ND, 55kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:140 Amps, 75kW ND, 55kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:None

Control panel

Type: LCD or TFT color touchscreen
Operating Voltage: 24 VDC (±10%) or 110–230 VAC
Power Consumption: 10–20 W 
Operating Temperature: -10°C to +55°C 
Storage Temperature: -40°C to +70°C
Humidity: 5–95% (non-condensing)

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ

Armor ControlLogix Controller

Series:ControlLogix
Module Type:Armor ControlLogix Controller
Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC

Digital Input Module

Series:ControlLogix
Module Type:Isolated Digital Input Module
Inputs:16 Individually Isolated Inputs
Input Voltage:240 Volts AC
Operating Voltage Range:159-265 Volts AC
Input Delay Time:Programmable 9 or 18 milliseconds

ControlLogix Lithium Battery Assembly

Series:ControlLogix
Battery Type:Externally Mounted
Power Dissipation (Max):4.5 Watts
Mounting:Horizontal
Enclosure:Open
Backplane Current (5 Volts DC):10 amps
Backplane Current (24 Volts DC):2.8 Amps