ALL MANUFACTURERS

Local I/O Bus Cable

MPU TRANSITION MODULE

TMPU1002
DISCONTINUED BY MANUFACTURER
MPU TRANSITION MODULE
COPPER TRANS MOD FOR EXTREME ENG CPU 18-410051-001 DUAL DIODE MODULE
DIN
6A DUAL DIODE MODULE

UCN Series Module

Output Frequency:50 kHz
Processing Capacity:High-speed data processing
Communication Protocol:Supports multiple industry-standard protocols
Operating Temperature:-40°C to +70°C
Memory Size:Extended memory capacity for enhanced system functionality

Analog Module Termination Cable

NKAS013
TERMINATION UNIT CABLE
MMU-TU
3FT CABLE LENGTH

Esacontrol Board

SEAM E08002 
DISCONTINUED BY MANUFACTURER
Esacontrol Board
INFI 90
5 VA
+5
+15 VDC

FLAME DETECTOR

UW4100
DISCONTINUED BY MANUFACTURER
FLAME DETECTOR

Power Supply

51198947100
DISCONTINUED BY MANUFACTURER
POWER SUPPLY
115/240 VAC INPUT
50/60 HZ
25 VDC OUTPUT
10 AMP LOAD
550 WATT POWER

BASEPLATE HORIZONTAL

P0914XA
BASEPLATE HORIZONTAL
200SERIES
DINRAIL
MT FIELDBUS

PROVOX DISCRETE I/O TERM

Model: CL6343X1-A1 (34B2790X032)
System: Emerson PROVOX DCS
Function: Control and monitor discrete (on/off) I/O signals for industrial process automation
Input/Output: Discrete signal input and output (typical voltage 24V DC)
Installation: Control cabinet or rack installation
Communication: Integrated with PROVOX DCS system, supporting real-time data exchange
Power supply: Standard DC power supply compatible with PROVOX system

TACHTROL 10 and 30 Dual Input Digital Tachometer

Manufacturer : AI-Tek Instruments
Product No. : T77630-10
Product Type : TACHTROL 10 and 30 Dual Input Digital Tachometer
Input Power : 80-264 Vac/12-30 Vdc
Enclosure : Std.Panel Mount

INPUT MODULE

Series:VersaMax
Part Number:IC200ALG620
Description:Analog input module
Product Description:4-point RTD / Resistance input module
Resolution:16 bits
Update Rate:210 milliseconds
Compatible RTD Wiring type:3-wire and 4-wire RTDs
Bus Voltage:5 Volts DC
Resistance input range:0-500 Ohms; 0-3000 Ohms
Isolation (Input to Frame):1500 Volts AC
Digital Resolution:15 bits plus sign
Isolation (Input to Logic):250 Volts AC
Frequency:50-60 Hertz
Temperature:0-60 degrees Celsius
Maximum lead resistance:5 ohms per lead

Analog Input Thermocouple Module

Thermocouple types J, K, T, S, R, none (used for mV inputs)
Spans (+/–) 19.5mV, 39mV, 78.125mV, 156.25mV, 312.5mV,625mV
Converter resolution 15 bits + sign
Conformity error +/–0.3 degree Celsius, +/–0.5 degree Fahrenheit.
Normal mode rejection 60dB, at 50/60 Hz, 100% span
Common mode rejection 120 dB at 50/60Hz, 100 ohm imbalance
Common mode voltage 3 VDC maximum

Analog Output module

No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption:   50 mA from +5V bus

Embedded Controller

Double-High VME Module
MC68LC040 or MC68040 Microprocessor
1MB, 4MB, or 8MB of Parity-Protected DRAM
512KB SRAM

CABLE ASSEMBLY 10FEET

4000098516
CABLE ASSEMBLY 10FEET

PLC Board

Part Number: 08001-4247 01-W3726F 31A
Type: PLC Control Board
Manufacturer: Motorola (now part of Broadcom)
Functionality: This is a part of the Motorola 31A series of PLC board
Input/Output:
Digital I/O for controlling ON/OFF processes.
Analog I/O for monitoring and controlling processes requiring continuous measurement 

I/O cable

Part Number: 4000094-316
Type: I/O Cable
Compatibility: Compatible with TRICONEX safety systems, typically used with I/O modules and other system components for data transmission.
High-quality insulation for protection against environmental factors.
Designed to withstand high temperatures, vibration, and harsh industrial environments.
Reliable performance for continuous monitoring and control in critical processes.

Digital Output Module

Operating Voltage:380V AC
Input Frequency:50/60Hz
Processing Speed:120 MIPS
Memory Capacity:1MB RAM, 16MB Flash
Communication Interfaces:Ethernet, DeviceNet, FF

SERIAL-ETHERNET/IP CONVERTER

Category : Networking Solutions Serial Device Servers
Manufacturer:HMS Networks
Type:Converter, Serial to Ethernet
RESOURCE TYPE:LINK
Datasheets :EtherNet/IP Installation Guide
CAD Models:AB7007-C Models

Converter Control Board

Converter Control Board
6U SINGLE SLOT VME SINGLE BOARD COMPUTER (SBC)
INTEL ULTRA LOW VOLTAGE CELERON PROCESSOR AT 400 MHZ OR 650 MHZ

Embedded Single Board

Up to 512MB PC100 SDRAM
(PC133 stepped down to 100 MHz)
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port

PLANT COMMUNICATION CBLE

NKCL01-100 
Coax INFI-Net Comm Link - 100 Ft (Pvc)
Connect NTCL to NTCL, Must use with NKTL01
15240 mm

PLANT COMMUNICATION CBLE

NKCL01-50
Coax INFI-Net Comm Link - 50 Ft (Pvc)
Connect NTCL to NTCL, Must use with NKTL01
15240 mm

Programmable Automation Controller

10/100/1Gbps
0.6 MB Standard
1000 per task
32 Tasks
16 Ethernet/IP Nodes
Device Level Ring, Star, and Linear

Programmable Automation Controller

1 Megabytes
0.5 MB
2GB via 1784-SD2
31 Standard tasks; 1 Safety Task
8 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
256 Motion Axes