ALL MANUFACTURERS

Gas Detection Monitor

Power Consumption: 7.0 Watts, typical
External transducerPower+24 Vdc +4 
-2 Vdc @ 1.8 AMinimum
Voltage +5 Vdc typica
Current 0.4 mA typical, 4 mA peak
OperatingTemperature:-30°C to +65°C

Thermocouple I/O Module

Product Type:FLEX Ex RTD Thermocouple I/O Module
Inputs:8
Input Type:Internal Bus Configurable
Signal Input Range:40 to 100 millivolts
Lead Resistance Compensation:15 Watts maximum
Settling Time:8 milliseconds
Module Field-side Power Consumption:1.6 Watts
Power Dissipation:1.6 Watts
Thermal Dissipation:5.46 BTU/hour maximum
Power Supply:9.5 Volts DC

Digital Output Module

Transistor output 16 point
(for 0.5A, Source output)

Digital Input Module

DC 24V Input, 16 point
(Current source / sink input)

Analog Input module

Current Input: 8 channels
DC 4 ~ 20mA / 0 ~ 20mA

POWER SUPPLY MODULE

POWER SUPPLY
8.5AMP
200-240VAC
Rated inputvoltage:110 VAC
Input voltagerange:85V~132VAC
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Max. input power:110 VA / 42 W
Inrush current:20A peak and lower (within8 ㎳ )

POWER SUPPLY MODULE

Rated inputvoltage:110 VAC
Input voltagerange:85V~132VAC
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Max. input power:110 VA / 42 W
Inrush current:20A peak and lower (within8 ㎳ )
Efficiency:65% or higher
Output voltage:5VDC (±2%)
Output current:5.5A
Output power:27.5W @ 55℃
Over currentprotection:6.0 A ~ 13.0 A

Fast Ethernet Module

Fast Ethernet
100/100Mbps
RJ-45 (Electric)
Protocol TCP-IP, UDP-IP
Network Control Protocol(Access Method) CSMA/CD
Transmission Speed: 100 Mbps
Max # of nodes 64

Power Supply Module

Program memory capacity: 640KB
I/O points(installable):3,072 points
Max. I/O memory contact:32,768 points
Symbolic variablearea(A):128KB 
I variable:4KB
Flag variable F:4KB
Operator:18
Basic functionblock:43

memory backup module

C300v5 controller
memory backup module
C300 Memory Backup Assembly
Power Requirements: 24 V DC
Current Draw: 150 mA
Operating Temperature Range: 0°C to 70°C

Open Plant Controller

ComfortPoint™ Open solution 
fully programable 
BACnet-Building Controller (B-BC) 
for AHU, RTU and Central Plant applications
CPO-Studio compatible

CPO-Room Controller

ROOM CONTROLLER
CONTROLPOINT
BACNET
MS/TP
6 ANALOG OUTPUTS
4 RELAYS
4 TRIACS
230 VAC

Actuator Controller

Operating Voltage:24 VAC ± 10%
Power Consumption:15 VA
6 DOs (Triac output, 2 reserved for internal actuator)
Maximum voltage: 24 VAC
Maximum continuous current: 500 mA
Minimum current: 30 mA 
3 AOs, 0 -10 Vdc 
Resolution: 12-bit 

I/O bus in extension cabinet

Type number: FS-IOBUS-CPIOX
Approvals: UL, CSA
Connector (top): 34 pole latch (male)
Connectors (other): 34 pole latch (female)
The IOBUS-CPIOX6 is used for 
connection between controller chassis 
and I/O chassis in position 1,2, 3, 4, 5, and 6.

Power Distribution Board

Type numbers: FS-PDB-IO05
Approvals: CE, UL, TUV, CSA
5V-x: 4 pos, action pin, header
WdPx: 8 pole, pin header
DIN EN rails: TS32 / TS35 × 7.5
Used rail length: 171 mm (6.73 in)

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

IVEONET QMR Chassis

Input Voltage: 24 VDC
Output Voltage: 5 VDC
Compliance and Approvals: CE, UL, CSA, TUV, FM

SC SIC CABLE

Model Number: FC-SIC2200
Description: SC SIC Cable with two connectors
Length: 20 meters

Safety Manager SC Hardware

Power Supply: 24 VDC
Input Voltage Range: 0–30 VDC
Output Current: 5 A to 16 A
Operating Temperature: -20°C to +60°C

Safety Universal I/O module

Power supply 24V DC
Rated Current 55mA at 24V
Power dissipation 1.22W at 24V DC with 
20mA loop current & 250 Ohm load
Power Indication Green LED
Power/DCS to Field 1500 VAC
Voltage Input 24V DC
Interface to DCS 4 to 20mA with HART
Transfer accuracy at 200C +/- 20uA

Universal Safety I/O Module

Maximum Safe Voltage (Um) 250V
Uo 25.2 V
Io 110.1 mA
Po 693.6 mW

Analog Output Module

Output Channels 16
Output Ripple < 100 mV peak-to-peak at 
power line frequency, across 250 load
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Output Current Range 0 mA, 2.9 mA to 21.1 mA

Power Distribution Cable

FSPDCIOEP3A
Power Distribution Cable

Power Distribution Cable

FSPDCIOIP1A 
Power Distribution Cable