
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm, 100K
6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated by
270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder PLAIN SHAFT
TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm
100K, 6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated
by 270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder
PLAIN SHAFT, TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP65 AS FLANGE IP67
PAINT FINISH RAL7016
1FK7 Synchronous Motors
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm
100K, 6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated
by 270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder
PLAIN SHAFT, TOLERANCE N
WITH HOLDING BRAKE
DEGREE OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S synchronous motor
1FK7-CT PN=0.5 kW
UDC=600V M0=1.15 Nm (100K)
NN=6000rpm; naturally cooled IMB
5 design (IM V1, IM V3) Flange
1 power connector rotatable
absolute encoder 24 bit +12-bit
multi-turn with DRIVE-CLiQ
interface (encoder AM24DQI) smooth shaft
tolerance N with Holding brake
degree of protection IP64
1FK7 Synchronous Motors
SIMOTICS S synchronous servo motor
1FK7 Compact 1.1 Nm 100K,
6000 rpm 0.50 kW,
naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable by 270°
Absolute encoder 20BIT +12-bit
multi-turn with Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder plain shaft,
tolerance N with holding brake degree of protection IP64
1FK7 Synchronous Motors
SIMOTICS S SIMOTICS S-1FK7
1FK7-CT synchronous motor
PN=0.82 kW UDC=600 V
M0=3 Nm (100K); NN=3000
r/min; naturally cooled design MB 5 (IM V1, IM V3)
flange 1 power connector rotatable
absolute encoder 24 bit +12 bit
multiturn with DRIVE-CLiQ
interface (encoder AM24DQI) plain shaft,
tolerance N with holding
brake degree of protection IP64
1FK7 Synchronous Motor
SIMOTICS S SIMOTICS S-1FK7
1FK7-CT synchronous motor
PN=0.82 kW UDC=600 V
M0=3 Nm (100K); NN=3000
r/min; naturally cooled design MB 5 (IM V1, IM V3)
flange 1 power connector rotatable
absolute encoder 24 bit +12 bit
multiturn with DRIVE-CLiQ
interface (encoder AM24DQI) plain shaft,
tolerance N with holding
brake degree of protection IP64
1FK7 Synchronous Motors
SIMOTICS S synchronous servo motor
1FK7 Compact 3.0 Nm
100K 3000 rpm,
0.82 kW naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable
by 270° ABSOLUTE ENCODER ENDAT
2048 P/REV (ENCODER A-2048);
PERFORMANCE REDUCTION
BY 10% DUE TO ABSOLUTE ENCODER;
PLAIN SHAFT,
TOLERANCE N;
WITH HOLDING BRAKE DEGREE
OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S synchronous servo motor
1FK7 Compact 3.0 Nm
100K 3000 rpm,
0.82 kW naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable
by 270° ABSOLUTE ENCODER ENDAT
2048 P/REV (ENCODER A-2048);
PERFORMANCE REDUCTION
BY 10% DUE TO ABSOLUTE ENCODER;
PLAIN SHAFT,
TOLERANCE N;
WITH HOLDING BRAKE DEGREE
OF PROTECTION IP64
Synchronous Motors
SIMOTICS S synchronous servo motor
1FK7 Compact 3.0 Nm
100K 3000 rpm,
0.82 kW naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable
by 270° ABSOLUTE ENCODER ENDAT
2048 P/REV (ENCODER A-2048);
PERFORMANCE REDUCTION
BY 10% DUE TO ABSOLUTE ENCODER;
PLAIN SHAFT,
TOLERANCE N;
WITH HOLDING BRAKE DEGREE
OF PROTECTION IP64
1FK7 Synchronous Motors
SIMOTICS S synchronous servo motor
1FK7 Compact 3.0 Nm
100K 3000 rpm
0.82 kW naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable
by 270° ABSOLUTE ENCODER 2048
P/REV (ENCODER A-2048)
WITH DRIVE-CLIQ INTERFACE
PERFORMANCE REDUCTION BY
10% DUE TO ABSOLUTE ENCODER
PLAIN SHAFT, TOLERANCE N
W/O HOLDING BRAKE DEGREE
OF PROTECTION IP64
RTD Input Terminal Board
Function: RTD Input Terminal Board
Series: Mark VIe
Number of Channels: 8
Operating temperature: 0 to 60 o C
Input voltage: 125 V
Total Output: 400 W
Analog Input Terminal Board
Voltage Input: ±10V, 0-10V, or 0-5V
Current Input: 4-20 mA
Nominal Supply Voltage: 24 VDC
Power Consumption: 250 mA
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
TERMINATION BOARD
Span: 0.3532 to 4.054 V
Size: 17.8 cm high x 33.02 cm wide
Technology: Surface mount
Temperature Operating: -30 to 65oC
Product Type: Servo Terminal Board
Terminal Board
Series: Mark VI
Product Type: Terminal Board
Trip Solenoids: 3
Solenoid Rated Voltage/Current: 125 V dc
Solenoid Response Time: L/R time constant is 0.1 sec
Current Suppression: Metal oxide varistor
Control Relay Coil Voltage Supply: 28 V
Flame Detector Supply Voltage/Current: 335 V dc
Flame Detectors: 8
3300 XL 8 mm Probe
3300 XL 8 mm Probe
3/8-24 UNFthread
without armor
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector, standard cable
00 Not required
3300 XL 50 mm Proximitor Sensor
3300 XL 50 mm Proximitor Sensor
9 19.0 meters (29.5 feet)
systemlength
DIN mount
0 0 No Approvals
3300 XL 8 mm Proximity Probe
3300 XL 8 mm Probe
3/8-24 UNFthread
with armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector, standard cable
00 Not required
3300 XL 11 mm Probe
3300 XL 11 mm Probe
1/2-20 UNFthread
without armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector, standard cable
00 Not required
Proximity ProbeHousing Assemblies
16 3300 XL 8mm probe
05 0.5 m (20 in)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Proximity Probe HousingAssemblies
16 3300 XL 8 mm probe
10 1.0 m (39 in)
03Two plugs,
one 3/4-14 NPT fittingOne 3/4-14 to 1/2-14 NPT SST
reducerOne cable seal grip with grommets
forthe following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
3300 XL 8 mm Probe
3300 XL 8 mm Probe
3/8-24 UNFthread
without armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector, standard cable
00 Not required
3300 XL 8 mm Probe
3300 XL 8 mm Probe
3/8-24 UNFthread
without armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector, standard cable
05 CSA, ATEX, IECEx Approvals
REVERSE MOUNT PROBE
REVERSE MOUNT PROBE
3300 XL
11 MM
1 M TOTAL LENGTH
MINIATURE CLICKLOC COAXIAL CONNECTOR
3300 XL 25 mm Proximity Probe
02 M30x2 thread
MaximumUnthreadedLength224 mm
MaximumUnthreadedLength8.9 in
MaximumUnthreadedLength250 mm
10 1.0 metre (3.3 feet)
00 No Armor
00 No Approvals
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.