ALL MANUFACTURERS

Emergency Overspeed Board

Supply Voltage:24V DC ±10% 
Power Consumption:7 W (idle), 10 W (max)
Isolation:1500V AC 
MPU Signal Range:10–250 V RMS
Processor:3× 32-bit DSPs

Emergency Overspeed Board

PC BOARD
EMERGENCY OVERSPEED BOARD
MARK V
Supply Voltage:24V DC ±10% 
Power Consumption:8 W 
Isolation:1500V AC 

I/O Engine CPU Board

DRIVE BOARD
PROCESSOR CARD
DAUGHTER BOARD
UC2000
MARK V

UC2000 Motherboard

CIRCUIT BOARD ASSY
DS200UCIAG1A
Series:Mark V
Part Number:DS215UCIAG1AZZ05A
Functional Description:UC2000 Motherboard
Functional Acronym:UCIA
PCB Coating:Normal Coating
Assembly Type:DS215 Special Assembly

Control board

Processor:32/64-bit RISC CPU
RAM: 512 MB DDR3
Flash: 1 GB 
Motion:Axes Controls 4–16 servo axes 
Supply Voltage:24V DC (±10%), 2A max
Power Consumption:≤25 W (peak)
Isolation:1500V AC (I/O to logic)

Processor Module

Power Supply:24 V DC (±15%) 
CPU:32-bit RISC processor 
Clock Speed:80–100 MHz
I/O Capacity:Supports up to 64 I/O modules
Optional Protocols:Modbus RTU/TCP, PROFIBUS DP

Gate Distribution and Status Board

Supply Voltage: +24 V DC (±10%) 
Power Consumption: ≤10 W
Isolation Voltage: 2500 V AC
Voltage: +15 V / -10 V 
Response Time: ≤1 μs for fault detection.

Exciter HS Relay Driver Board

Supply Voltage: +24 V DC
Power Consumption: ≤15 W 
Isolation Voltage: 1500 V AC
Voltage Range: 24–125 V DC
Current Rating: Up to 5 A per channel
Switching Speed: ≤10 ms 

Protective Termination Expander Board

PC BOARD
EOS PRINTED CIRCUIT BOARD
MARK 5
Input Voltage:24 VDC ±10%
Power Consumption:8W (typical)
Isolation:1500 VAC
Digital Inputs :24VDC

DPU Distributed Processing Unit

Input Voltage: 20–30 VDC
Power Consumption: 18W
Isolation:1500 VAC
RAM: 1 GB DDR3
Flash Storage: 4 GB eMMC
Ethernet 2x 10/100/1000 Mbps

RXi Controller

RXI CONTROLLER / PACSYSTEMS
HIGH PERFORMANCE DISTRIBUTED IO
PROGRAMMABLE
REQUIRES ICRXIACCIDM001A

PRECISE AUTO MATION GUIDANCE CONTROLLERS 2000C

Drive Output: Integrated PWM servo drive
Bus Voltage: 24V DC
Peak Current per Axis: Typically 20A
Continuous Current per Axis: 10A 

Common Analog I/O Board

Series: Mark V
Product Type: Terminal Board
Input Channels: 8 Analog Inputs
Input Resolution: 12-bit / 16-bit
Output Type: Voltage (0-10V, ±10V)
Output Resolution: 12-bit / 16-bit
Input Type: Voltage (0-10V, ±10V)
Communication Protocol: RS-485
Power Supply: 24V DC ±10%, < 5W
Isolation: 1500V

Robicon Cell control board

Memory:512 KB SRAM
ADC Channels:8x 16-bit
Cell Status Output:Relay contacts 
Supply Voltage: 24 VDC (±10%) via backplane
Consumption: 18W (typical)
PWM Frequency:0–2.5 kHz 
Voltage Accuracy:±0.5% FS (DC link)
Fault Response:<5 µs

CPU BOARD

Expandable: Up to 16 MB
Serial Ports 2× RS-232/485
Voltage: +5 VDC (±5%)
Clock Speed:25 MHz
Default DRAM:4 MB
NVRAM:128 KB

PCB ASSY MOTION CONTROL

Input Voltage: +24 VDC (±10%)
Power Consumption: 45W 
Isolation: 1500 VAC between logic
Protections: Overcurrent 
Positioning Resolution:±0.1 µm
Velocity Range:0.001–2.5 m/s
Jerk Control:Programmable S-curve profiles
Synchronization:Multi-axis coordination (±5 ns skew)

Simplex Trip Board

TRIP CONTROL CARD
PC BOARD SDCC MARK V SYSTEM
Analog Trip Signals: 4–20 m
Digital Trip Signals: 24 VDC
Aux Relay (K2): Alarm/status outputC
Resolution: 0.1% of setpoint
Accuracy: ±0.25% FS
Voltage: +24 VDC (±10%)
Consumption: 15 W (max)

DOS DUP Processor Board

PC BOARD
MARK 5 SERIES
TURBINE AND GAS CONTROL BOARD
WITH ON-BOARD MEMORY
MULTI-INPUT/OUTPUT

Power Connect Card

Series: EX2000
Microprocessor: Intel Ultra Low Voltage Celeron 650 MHz
Operating System: QNX Neutrino
Operating Temperature: 0 to 60°C
Product Type: Power Connector
Analog Input current: 240 V rms
DC Bus Voltage: 125 VDC
Auxiliary Voltage: +15 VDC

EX TOUCH PANEL

Power Supply: 24 VDC
Power Consumption: ≤ 65 W
Size: 12.1" (diagonal, 4:3 aspect ratio)
Resolution: 1024 × 768 (XGA)
Brightness: ≥ 400 cd/m² (adjustable)
Touch Accuracy: ±1 mm (typical)
Touch Points: Single-touch (resistive)

VME Embedded Controller Board

32 MHz MC68040 Microprocessor 
with Floating-Point Coprocessor
8 MB DRAM
512 KB SRAM
(4) IndustryPack Ports
Ethernet Transceiver Interface 
with 32-Bit Local Bus DMA

VOICE FREQUENCY TELEGRAPHY DEVICE

Carrier Frequencies: 300–3400 Hz 
Channel Spacing: 120 Hz or 240 Hz
Shift Range: ±30 Hz, ±60 Hz, or ±120 Hz 
Baud Rate: 50 Bd or 200 Bd 
Voltage: 48/60 VDC
Power Consumption: <15 W
Operating Threshold: -30 dBm 
Voltage: 48/60 VDC nominal 
Operating Temperature: -20°C to +65°C.

PLC MODULE

Processor:32-bit RISC CPU
Memory:2–4 MB RAM
Digital: 16–32 channels
Backplane Interface:Parallel bus 
Power Requirements:+5V DC (logic)
Power Consumption:≤ 8W

PLC BOARD

Power Supply:24V DC (±10%)
Power Consumption:≤ 5W
Isolation:1500V AC 
 Digital: 16–32 channels
Analog: 4–8 ch

PLC BOARD

CPU:32-bit RISC processor 
Clock Speed:100–200 MHz
Operating Voltage:24V DC (18–32V DC)
Isolation :1500V AC (I/O-to-logic)
Temp Range:-40°C to +85°C
Humidity:5–95% non-condensing