
Interconnect Cable
Conductors: 20 AWG shielded twisted pairs
Voltage Rating: 60V DC max
Current Capacity: 2A per conductor
Impedance: 100Ω ±15%
Shielding: Foil + braid
Bend Radius: ≥5x cable diameter
Jacket Material: PVC (oil-resistant)
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 0 mm
Minimum case length: 150 mm
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 NSv Proximity Probe
Chemical-Resistant: Outperforms 3300 RAM probes
Thread: M10x1
Linear Range: 1.5mm (60 mils)
Gap Setting: 1.0mm (40 mils)
Torque: 7.5 N·m max
Multiple Global Approvals
MIL-C-5015 connector standard
Velomitor Piezo‑Velocity Sensor
03 1/4-28 UNF
04 Multiple approvals (CSA, ATEX)
Sensitivity:3.94 mV/mm/s (100mV/in/s) ±5%.
Velocity:Range 1270 mm/s (50 in/s) peak
Output BiasVoltage-12 ±3.0 VDC
overtemperature referenced toPin A
DynamicOutputImpedanceLess than 2400 Ω
XY/GAP Dual Vibration Monitor
0 1 0-3 mils peak-to-peak (pp)
0 1 3300 8 mm, 3300 XL 8mm or7200 5 mm and 8 mm
Proximitor Sensor, 200 mV/mil
0 2 Hermetically-sealed
0 1 CSA/NRTL/C
0 0 None
0 2 3X
3300 XL 11 mm Proximity Probes
330704 3300 XL 11 mm Probe
M14 x 1.5 thread,with armor
Minimum unthreaded length:10 mm
Minimum length:60 mm
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
00 Not required
3300 XL 11 mm Extension Cable
3300 XL 11 mm Extension Cable
080 8.0 meters (26.2 feet)
13 Armored FluidLoc cable
withconnector protector
00 Not required
3300 NSv Extension Cable
3300 NSv Extension Cable
045 4.5 meters (14.8 feet)
03 Without stainless steel armor
with connector protector
00 Not Required
3300 NSv Proximity Probes
330903 3300 NSv Probe
M8X1 thread,without armor
Minimum unthreaded length:0 mm
Minimum length: 50 mm
05 0.5 meter (20 in)
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
00 Not required
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 4.3 in
15 1.5 meter (4.9 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
Velomitor CT Velocity Transducer
02 Stud 3/8-in 24 to 1/2-in 20
00 MIL-C-5015 connection interface
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%.
Transverse Response:Less than 5% of the axialsensitivity
Amplitude Linearity:±2% to 63.5 mm/s pk(2.5 in/s pk)
Output BiasVoltage:10.1 Vdc ± 1.0 Vdc, Pin
Proximity ProbeHousing Assemblies
16 3300 XL 8mm probe
10 1.0 m (39 in)
3.5 in (88.9 mm) = 35
9.8 in (248.92 mm) = 098
03One 3/4-14 NPT plugOne 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets forthe following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Display Interface Module
System Event List
Alarm Event Lists
All Channel, Monitor, Relay Module
Keyphasor* Module or TachometerModule data
135799-02:3500/93 Display Interface Module
(use with A05 thru A08 options)
Interconnect Cable
Rack End: 16-pin male connector
Field End: Typically M12 connectors
Number: 16 individual shielded twisted pairs
Gauge: 22 AWG stranded copper
3300 XL Proximitor Sensor
3300 XL Proximitor Sensor
10 1.0 meter (3.3 feet) system length
panel mount
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum case length: 9.6 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
COOPER Vibration probe
Tip Diameter: 8 mm
Sensitivity: -7.874 mV/µm (-200 mV/mil)
Cable Length: -00100
Linear Range: Typically 2mm
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 3.2 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector,
standard cable
00 Not required
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 0 mm
Minimum case length: 20 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.8 in
Minimum case length: 2.0 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
PROXPAC XL Proximity Transducer
2 8 3300 XL 8 mm probe withMultiple Approvals
0 5 50 mm
0 35 30 mm
0 1 One M25 fitting, two plugs
0 23/4-14 NPT
3300 NSv Proximity Probes
330901 3300 NSv Probe,
1/4-28 UNF thread,without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.2 in
70 7.0 meters (23.0 feet)
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
05 Multiple Approvals
3300 XL 8 mm Reverse Mount Probes
3300 XL 8 mm Reverse Mount Probes
330105-02-12-CC-DD-EE3/8-24 UNF threads
05 0.5 meter (1.6 feet)
00 Not required
Probe TipMaterial Polyphenylene sulfide
Probe Case Material AISI 303 or 304 stainless steel
Minimum Cable Bend Radius 25.4 mm
Proximity Probe HousingAssemblies
Proximity Probe HousingAssemblies
00 Probe not required
00 Probe cable not required (Option Amust also be 00)
3.1in (78.74 mm) = 0031
01 One 3/4-14 NPT fitting, two plugs.
02 3/4-14 NPT (Required if orderingStandoff Adapter Option)
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.