

























Maintaining the health of your critical rotating machinery depends on the integrity of your monitoring systems. This page offers a complete inventory of Bently Nevada components, essential for ensuring your Turbine Supervisory Instrumentation (TSI) operates flawlessly. Access to the correct TSI spare parts is the key to preventing costly, unplanned downtime and maintaining operational safety. We provide a full spectrum of new and obsolete Bently Nevada parts to keep your most valuable assets protected and productive.
The accuracy of any machinery protection system starts with its sensors. Our inventory includes a vast selection of TSI sensors engineered for precision and resilience in demanding industrial settings. A cornerstone of any TSI system is the Bently Nevada 3300 XL 8mm Proximity Sensor (330101-00-10-05-02-00). This non-contacting transducer leverages eddy current technology to deliver exceptionally accurate measurements of shaft vibration and axial position. The quality of this data is fundamental to all machinery health analysis. Using genuine Bently Nevada sensors guarantees that your monitoring modules receive clean, reliable signals, which is non-negotiable for effective asset protection.
The Bently Nevada 3500 system is the global standard for machinery protection, and we stock the critical I/O modules required to maintain its peak performance. A key component available here is the 3500/42M Proximitor/Seismic Monitor (3500/42M-01-00-00). This powerful four-channel module processes signals from both proximity and seismic sensors, providing continuous protection by comparing real-time data against configured setpoints.
For deeper diagnostic insights, the 3500/25 Enhanced Keyphasor Module (3500/25-01-02-00) is indispensable. A Keyphasor sensor provides a once-per-turn timing reference that is crucial for synchronous data analysis. This module conditions the signal, enabling your analysts to accurately diagnose complex faults such as imbalance and misalignment. Beyond these, we stock specialized modules, including various gas turbine cards, to support the unique requirements of specific machine applications.
Connecting machinery protection data with plant-wide control systems requires robust and reliable communication hardware. The 3500/92 Communication Gateway (3500/92-01-01-00) is designed specifically for this task. The 3500 monitoring system is a trusted solution for continuous online surveillance and protection of critical rotating machinery. It tracks key parameters such as vibration, position, and temperature to detect early signs of equipment issues, reduce unplanned downtime, and support reliable, long-term operation across industrial facilities.
Browse our extensive inventory to find the exact Bently Nevada component for your needs. Whether you are performing routine maintenance, planning a system upgrade, or responding to an urgent outage, having access to high-quality spares is critical. Our stock covers new, and hard-to-find parts for systems including the 3300, 3500, and more. If you cannot locate a specific component or require assistance with compatibility, our expert team is ready to help you source the right solution quickly.

ADAPT Aeroderivative Monitor
Displacement: 0–500 µm peak-to-peak
Velocity: 0–20 mm/s RMS
Acceleration: 0–50 g peak
Frequency Response: 0.5 Hz to 30 kHz
Sampling Rate: Up to 100 kHz
Operating Temperature: -40°C to +85°C
Wind Turbine Monitor
Vibration Velocity: Typical range 0–20 mm/s RMS
Vibration Acceleration: 0–50 g peak
Frequency Range: 0.5 Hz to 10 kHz
Speed Range: 0–3,000 RPM
Analog Outputs: 4–20 mA
Operating Temperature: -40°C to +85°C
Voltage: 18–30 VDC
Power Consumption: <5 W
Wind Turbine Monitor
Vibration Velocity: Typical range 0–20 mm/s RMS
Vibration Acceleration: 0–50 g peak
Frequency Range: 0.5 Hz to 10 kHz
Speed Range: 0–3,000 RPM
Analog Outputs: 4–20 mA
Operating Temperature: -40°C to +85°C
Voltage: 18–30 VDC
Power Consumption: <5 W
Vibration Transmitter
05 0-5 mils pp (0-125 μm pp)
50 5.0 meters (16.4 feet)
01 35 mm DIN rail clips
01 CSA Division 2
Thrust Transmitter
25 25-0-25 mils
50 5.0 meters (16.4 feet)
01 35 mm DIN-rail clips
01 CSA Division 2
Proximitor Probe Extension Cable
Voltage Rating: Rated for ≤ 250V AC/DC
Impedance:50–100 Ω
Temperature Range: -40°C to +120°C
7.5-meter (24.6 ft) cable length
3300 NSv Proximity Probes
330901 3300 NSv Probe
1/4-28 UNF thread,without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 4.0 in
10 1.0 meter (39 in)
02 Miniature coaxial ClickLoc connector
standard cable
05 Multiple Approvals
3300 XL 8 mm Proximity Probes
330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum unthreaded length: 0.4 in
Minimum case length: 5.6 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 0 mm
Minimum case length: 50 mm
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
00 Not required
3300 NSv Proximity Probes
330901 3300 NSv Probe
1/4-28 UNF thread,without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.0 in
10 1.0 meter (39 in)
02 Miniature coaxial ClickLoc connector
standard cable
00 Not required
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 8.5 in
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.2 in
Minimum case length: 3.2 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 11 mm Proximity Probes
330701 3300 XL 11 mm Probe
1/2-20 UNFthread, without armor
Minimum unthreaded length:0.0 in
Minimum case length: 5.0 in
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
05 Multiple Approvals
3300 XL 8 mm Proximity
330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 4.2 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
Proximitor Probe Extension Cable
2174707500
EXTENSION CABLE
PROXIMITOR PROBE
7.5 Metres(295.2 inches)
00 Without armor
Proximitor Probe Extension Cable
2174707501
EXTENSION CABLE
PROXIMITOR PROBE
7.5 Metres(295.2 inches)
01 With armor
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 0.8 in
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
00 Not required
Recorder External Termination Block
Recorder External Termination Block
(Terminal Stripconnectors)
Analog Outputs:4–20 mA, 0–10V DC
Max Voltage Rating: 250V AC/DC
Current Rating: 5A per terminal
Proximity ProbeHousing Assemblies
28 3300 XL 8mm probe
selectablehazardous area approvals
05 0.5 m (20 in)
No standoff adapter = 00
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
3300 NSv Probe
330902 3300 NSv Probe
1/4-28 UNF thread,with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 2.5 in
10 1.0 meter (39 in)
02 Miniature coaxial ClickLoc connector
standard cable
05 Multiple Approvals
PROBE PROXIMITY VIBRATION 8MM
Frequency Response: 0 Hz (DC) to 10 kHz
Noncontacting
Gap-to-Voltage Transducer Systems
Measures Static and Dynamic Distances
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length:30 mm
Minimum case length: 100 mm
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
00 Not required
Proximity ProbeHousing Assemblies
16 3300 XL 8mm probe
05 0.5 m (20 in)
No standoff adapter = 00
019 1.9 in (48.26 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Proximity ProbeHousing Assemblies
16 3300 XL 8mm probe
05 0.5 m (20 in)
No standoff adapter = 00
135 13.5 in (342.9 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Maintaining the health of your critical rotating machinery depends on the integrity of your monitoring systems. This page offers a complete inventory of Bently Nevada components, essential for ensuring your Turbine Supervisory Instrumentation (TSI) operates flawlessly. Access to the correct TSI spare parts is the key to preventing costly, unplanned downtime and maintaining operational safety. We provide a full spectrum of new and obsolete Bently Nevada parts to keep your most valuable assets protected and productive.
The accuracy of any machinery protection system starts with its sensors. Our inventory includes a vast selection of TSI sensors engineered for precision and resilience in demanding industrial settings. A cornerstone of any TSI system is the Bently Nevada 3300 XL 8mm Proximity Sensor (330101-00-10-05-02-00). This non-contacting transducer leverages eddy current technology to deliver exceptionally accurate measurements of shaft vibration and axial position. The quality of this data is fundamental to all machinery health analysis. Using genuine Bently Nevada sensors guarantees that your monitoring modules receive clean, reliable signals, which is non-negotiable for effective asset protection.
The Bently Nevada 3500 system is the global standard for machinery protection, and we stock the critical I/O modules required to maintain its peak performance. A key component available here is the 3500/42M Proximitor/Seismic Monitor (3500/42M-01-00-00). This powerful four-channel module processes signals from both proximity and seismic sensors, providing continuous protection by comparing real-time data against configured setpoints.
For deeper diagnostic insights, the 3500/25 Enhanced Keyphasor Module (3500/25-01-02-00) is indispensable. A Keyphasor sensor provides a once-per-turn timing reference that is crucial for synchronous data analysis. This module conditions the signal, enabling your analysts to accurately diagnose complex faults such as imbalance and misalignment. Beyond these, we stock specialized modules, including various gas turbine cards, to support the unique requirements of specific machine applications.
Connecting machinery protection data with plant-wide control systems requires robust and reliable communication hardware. The 3500/92 Communication Gateway (3500/92-01-01-00) is designed specifically for this task. The 3500 monitoring system is a trusted solution for continuous online surveillance and protection of critical rotating machinery. It tracks key parameters such as vibration, position, and temperature to detect early signs of equipment issues, reduce unplanned downtime, and support reliable, long-term operation across industrial facilities.
Browse our extensive inventory to find the exact Bently Nevada component for your needs. Whether you are performing routine maintenance, planning a system upgrade, or responding to an urgent outage, having access to high-quality spares is critical. Our stock covers new, and hard-to-find parts for systems including the 3300, 3500, and more. If you cannot locate a specific component or require assistance with compatibility, our expert team is ready to help you source the right solution quickly.

Copyright Notice © 2004-2026 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.
The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.
Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.
You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.