Bently Nevada

Recip Rod Position Monitor

Signal :Accepts from 1 to 4 proximityprobe signals
InputImpedance:10 kΩ
Peak-Peak filter Fixed:1 Hz to 600 Hz
Gap filter: -3 dB at 0.09 Hz
Average pistonposition Fixed:1 Hz to 600 Hz
Average Gap:-3 dB at 0.09 Hz

System Rack

Full-size rack
01 19-inch Rack (14 module slots)
00 None
00 None
01 CE

Proximitor Sensor

Replaces 3300 RAM 
Transducer Systems 
and 3000-Series or 7000-Series 
190 Transducer System
Average Scale Factor of 
7.87 V/mm (200 mV/mil)

VibrationMonitors

DC Input 18~36 Vdc, max 7.5 W
Configurable Bandpass filter 0.2 Hz to 20 kHz
Scale Factorrange 5 to 1000 mV/g
Full scale range 2 to 80 g peak
Current Sink Source 3.3 mA ± 5%
Open Circuit Voltage -21 to -24 Vdc

3300 XL 8 mm Proximity Probes

330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor 
Minimum unthreaded length: 80 mm
Minimum case length: 160 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL Standard Extension Cable

3301300700005
EXTENSION CORD
070 7.0 meters (22.9 feet)
00 Standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Probe

3300 XL Standard Extension Cable
045 4.5 meters (14.8 feet)
03 Armored cable with connectorprotector
00 Not required

Velomitor XA Piezo-Velocity Sensor

Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
VelocityRange:1270 mm/s (50 in/s) peak
Transverse Sensitivity:Less than 5% of sensitivity
Amplitude Linearity:±2% to 152 mm/s (6 in/s) peak
MountingTorque:45 N-m (33 ft-lb) maximum

3300 XL 8 mm Proximity Probes

Unthreaded Length Option : 00 = 0 mm
Overall Case Length Option : 02 = 20mm
Total Length Option : 10 = 1.0 metre (3.3 feet)
Connector and Cable-Type Option : 02 = Miniature coaxial ClickLocTM connector, standard cable
Agency Approval Option : 00 = Not required
Probe Tip Material: Polyphenylene sulfide (PPS).
Probe Case Material: AISI 303 or 304 stainless steel (SST)