INPUT MODULE
CONTACT
EVENT
32 CHANNEL
Channels: 32 analog input channels
Signal Types Supported: 4-20 mA, 0-10 VDC
Signal Conversion: 16-bit ADC
for high-resolution data acquisition
Accuracy: Typically ±0.1%
Voltage Rating:1200 V
Current Rating:450 A
Switching Frequency:≤ 20 kHz
Isolation Voltage:4 kV AC
Supply Voltage: +15 V / -8 V DC
Gate Current: ±35 A (peak)
Input Voltage:24V DC
Current Consumption:100-150 mA
Power Supply:24V DC
Operating Temperature:0°C to 55°C
Storage Temperature: -20°C to 85°C
Humidity:5% to 95% relative humidity
51304685150
DISCONTINUED BY MANUACTURER
ADVANCED COMMUNICATIONS CARD
FOR ADVANCED PROCESS MANAGER (APM)
PROVIDES NETWORK COMMUNICATION WITH THE UCN
PROVIDES HIGH-ACCURACY TIME STAMPS
CONFORMALLY COATED
Space requirements: 4 TE, 3 HE (= 4 HP, 3U)
Power requirements: 5 V DC, 35 mA/24 V DC, 35 mA
Number of input channels: 16
Input range: 0-4.1 V
Input resistance: > 1 MΩ
Maximum load capacitance: 100 nF
A/D converter: 12-bit
A/D converter inaccuracy: ± 1 LSB
Module inaccuracy: < 0.25%
Absolute max. input signal: ± 36 V DC
Range 0-4.1 V
Extensive self diagnostics
Optional redundancy
Fast loop scan
Internal or external field power selection
On board excitation power
(no need for marshalling power)
Galvanic Isolation
Nominal input voltage:24 V D
Operational voltage range:
24 V DC –15%/+20% + 5% AC ripple
Logic power:8 W maximum
input voltage:33 V DC
reverse input voltage:–0.6 V DC
Short circuit current limit per input:2.4 A maximum
Fault current130 mA,
typical200 mA, maximum
Voltage Range: Typically 24 V DC
High (ON): 15–30 V DC
Low (OFF): 0–5 V DC
Channel-to-channel isolation: ≥ 1500 V AC/DC
Typical: < 10 ms
Voltage Range: 24 V DC
Max Continuous Current: 2 A per channel
Inrush Current: Supports up to 5 A for 100 ms
Channel-to-channel isolation: ≥ 1500 V AC/DC
Turn-On Delay: < 1 ms
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Input Voltage: 24 VDC (Nominal)
Current Consumption: Typically 1.5 A
CPU Type: 32-bit microprocessor based
Operating Temperature: 0°C to +60°C (32°F to 140°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
51405098100
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
HART
ANALOG
0.46 AMP
24 VDC
REPLACED BY 51454493-126
LCNP4E GUS/EXPERION LCN INTERFACE. DELL MODEL T5500 AND NEWER REQUIRE THIS BOARD FOR LCN CONNECTION.
Nominal input voltage : 24 V DC
Repetition rate : 1 sec minimum
Specified operational voltage range :
24 V DC –15% or +20% + 5%
AC ripple (19.2 to 30 V DC)
Supply Voltage: 24 VDC
Power Consumption: ~10–20 W
Voltage Range: 0–250 VDC
Current Range: 0–20 A
Accuracy: ±0.5% of full scale
Input-to-Output Isolation: 2500 VAC
Analog Inputs: 4–20 mA / 0–10 V
