Input Voltage:110/220 VAC or 24 VDC
Frequency Range:50 Hz or 60 Hz
Frequency: ±10%
Operating Temperature:-10°C to +60°C (14°F to 140°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)
Humidity:5–95% RH
Input Voltage Range: 0–30 VDC
Output Voltage Range: 0–30 VDC
Output Current: Up to 2 A per channel
Input Voltage: 24 VDC ±10%
Power Consumption: ≤10 W
Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +100°C
Humidity: 5–95% RH
Input Voltage Range: 0–30 VDC
Output Voltage Range: 0–30 VDC
Output Current: Up to 2 A per channel
Input Voltage: 24 VDC ±10%
Power Consumption: ≤10 W
Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +100°C
Humidity: 5–95% RH
Analog Inputs:0–10 VDC or 4–20 mA
Relay Outputs:250 VAC, 8 A
Power Supply: 24 VDC ±10%
Power Consumption: <10 W
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% RH
Enhanced display with local operator interface (LOI)
LCD display
Integral transient protection
Enhanced accuracy and stability
Transmitter-sensor matching with
Callendar-Van Dusenconstants
Variety of enclosures
Power Supply: 24 VAC/DC ±10%, 50/60 Hz
Rated voltage: 250 VAC
Maximum current: 8 A
Operating Temperature: -10°C to +60°C
Storage Temperature: -20°C to +70°C
Humidity: 10% to 90% RH
Power supply 24 VDC (12 to 35 V)
Output signal 4 to 20 mA / 2-wire
Load 0 to 1000 Ohm (35 V)
Accuracy Thermocouple at 25 °C ±2 °C (ITS-90)
Output shift by ambient temperature ±0.005 %
Operating ambient temperature -40 to +125 °C
Chipset type:Intel 945GME at 533 MHz
Display size:15 inch
Display colour:16 million colours
Luminance:350 cd/m²
Supply voltage limits:85…265 V
Inrush current:40 A
Power consumption in W:130 W
Material:Treated steel
Voltage:Standard 500 V DC
Accuracy: ±5% of reading
Operating Temperature:Typically -10°C to +55°C
Storage Temperature:-20°C to +70°C
Relative Humidity:10% to 95%, non-condensing
Input Voltage:24 V DC or 230 V AC
Single-phase supply 230V +10%/-1
Frequency 50/60
Control signal 0 to 10V
Power supply for possible manual control (+V terminal) 20 Vdc 40
Input Voltage:230 VAC ± 10%, 50/60 Hz
Operating Temperature:0°C to +50°C
Storage Temperature: -20°C to +70°C
Relative Humidity:10% to 90% RH, non-condensing.
Power Supply Voltage:24 VDC
Analog Input Channel :4 channels per module
Analog Input Range: ±10V
Digital Data Range :±2000
Resolution :12 bits (1LSB=5 mV)
Input Impedance :200 KΩ and above
Response Time: 3 ms × channels
Absolution Input Range :±15 V
Analog Output Range: 0~10V
Digital Data Range :0~4000
Temperature Range: Typically -50°C to 300°C
Accuracy: ±0.1°C
Input Voltage: 100-240 VAC, 50/60 Hz
Output Type:4-20 mA or 0-10 V
Operating Temperature Range: Typically -10°C to +60°C
Storage Temperature Range: Typically -20°C to +70°C
Housing design (light emission) Cylindrical
Housing length 70.2 mm
Thread diameter (housing) M18 x 1
Optical axis Axial
Sensing range max. 0.05 m ... 7 m
Sensing range 0.05 m ... 6 m
Type of light Visible red light
Light source LED
Adjustment Potentiometer, 270
Operating temperature range: 0...+ 100°C
Operating frequency range: 0...15 kHz (-3dB)
Displacement measuring range: 2,15 mm
Sensitivity: 7,87 V/mm (200 mV/mil)
Mean voltage: -10,00 V
Power supply: -24 V nominal
Standard cable: 4 - core (4 x 0,2 mm2)
Operating Voltage:120/230 V AC
Current Rating :16 A
Power Output :1.6 kW
Communication Interface:Profibus DP
Control Signals:Up to 16 digital inputs and outputs
Temperature Range:-25°C to 55°C
SIMATIC S7-1500
Analog I/O modules
Fully modular connection
Connection module
at DC / rated value 24 V
rated value 50 V
at DC / maximum 50 V
current / rated value 1 A
during operation 0 ... 60 °C
during storage -40 ... +70 °C
SIMATIC S7-1500
mounting rail 245 mm (approx. 9.6 inch)
incl. grounding screw
integrated DIN rail for mounting of
incidentals such as terminals
automatic circuit breakers and relays
SIMATIC S7-1500
CPU 1511-1 PN
central processing unit with work
memory 300 KB for program
and 1.5 MB for data, 1st interface
PROFINET IRT with 2-port switch
25 ns bit performance
SIMATIC Memory Card
Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts,
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR
Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts,
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR
Product type designation DQ 8x24VDC/2A HF
HW functional status FS03
Firmware version V2.2.0
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Current consumption, max. 40 mA
Rated value (DC) 24 V
Power available from the backplane bus 0.9 W
SIMATIC S7-1500 Analog input module
AI 8xU/I/R/RTD BA
16 bit resolution,Accuracy 0.5%, 8 channels in groups of 8
Common mode voltage 4 V DC,Diagnostics
Hardware interrupts; Delivery including infeed element
shield bracketand shield terminal
Front connector (screw terminals or push-in)
to be orderedseparately
The thinner cable is the signal cable.
It connects theSEMD or MEMD to the mastering box.
The thicker cableis the EtherCAT cable.
It is connected to the mastering boxand to the robot at X32.
Description of adjusting set withSEMD and MEMD
(Micro Electronic Mastering Device)
21000 aluminum probe housing assembly
A dome cover that screws into the body of the housing
Threaded ports for conduit connections
A probe sleeve of optional lengthl 0-rings
A reverse mount proximity probe
A thread seall Optional conduit fittings
An optional standoff adapter
Series:PACSystem RX3i
Product Description Rackless: CPU
RAM:64 MB
Operating System:VxWorks
Flash Memory:64 MB
Operating system:VxWorks
No. of Program blocks:768 Program block
Input Power Requirement:20 Watts
Maximum Program block size 128 KB
Display:OLED
Local display:OLED display
Rated Voltage: 230 VAC
Frequency: 50/60 Hz
Rated Current: Approximately 0.22 A
Power Consumption: ~50 W
Maximum Speed: 2800 RPM
Operating Temperature Range: -25°C to +55°C
Product specific application:Complex machines
Format of the drive:Compact
Mounting mode:Wall mount
rated supply voltage:380...500 V - 15...10 %
Nominal output current:5.5 A
Motor power kW:2.2 kW for heavy duty
Discrete input number:7
Transient overtorque:170…200 % of nominal motor torque
Number of inputs 16-channel, module isolatio
Input current 6 mA ± 20 %
Contact rating 24 V DC +20 % / -10 %
External power supply 24 V DC +20 % / -10 %
Instantaneous maximum permissibleinput voltage 30.0 V DC
Input response time 40 ms maximum
Number of input channels 16 channels, module isolatio
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Withstand voltage 1.5 kV AC between input signal and system for 1 minute
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Withstand voltage 1.5 kV AC between input signal and system for 1 minute
Voltage: 24V DC
Current Consumption: < 1 A
Power Consumption: 10 W
Operating Temperature:Range: -10°C to +60°C
Storage Temperature: -40°C to +85°C
Operating: 5% to 95% non-condensing
Number of inputs 16-channel, module isolation
Input signa:
No-voltage contact
ON: 1 kΩ maximum
OFF: 100 kΩ minimum
Input current 6 mA ± 20 %
Contact rating 24 V DC +20 % / -10 %
Input response time 40 ms maximum
Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Load resistance range 12 to 240 Ω
Maximum lamp load (*1) 1 A/output line
Output response time 30 ms maximum
Voltage: 24V DC (nominal).
Current Consumption: Typically 100 mA at 24V DC.
Power Requirement for Operation: Minimal, typically < 3W
Range: -10°C to +60°C
Storage Temperature: -40°C to +85°C
Operating: 5% to 95% non-condensing
Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Load resistance range 12 to 240 Ω
Maximum lamp load (*1) 1 A/output line
Output response time 30 ms maximum
Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Load resistance range 12 to 240 Ω
Maximum lamp load (*1) 1 A/output line
Output response time 30 ms maximum
Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Withstand voltage 1.5 kV AC between output signal and system for 1 minute
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum
Number of outputs 16-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 3.4 A minimum
Maximum leak current at output off status 1.6 mA
Output format Current source
Maximum load current 0.2 A/output line
Minimum load current 35 mA
Load resistance range 120 to 685 Ω
Output response time 30 ms maximum
Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Load resistance range 12 to 240 Ω
Maximum lamp load (*1) 1 A/output line
Output response time 30 ms maximum
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum
100-120 V AC power supply
24 V DC power supply
Standard Type (-20 to 40 °C)
(with ISA Standard G3 )
Dual-redundant power supply
Wide range temperature (-20 to 70 °C)
type (with Fan unit and ISA Standard G3)
Voltage Current
Thermocouple
Voltage: ±100mV to ±10V, Current: 4-20mA
Output Range
Voltage: 0-10V, Current: 4-20mA
Accuracy: ±0.1% of full scale
Response Time: ≤ 250 ms
Power Supply: 24V DC
Isolation Voltage: 1500V AC
Operating Temperature: -10°C to +55°C
Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Maximum lamp load (*1) 1 A/output line
Output response time 30 ms maximum
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum
Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
External power supply 24 V DC +20 %/–10 %
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum
Memory Size:1008 kB
Memory Type User Data:RAM
Controller Processing Time:0.0002 ms
Number of Digital Inputs:6
Number of Digital Outputs:4
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Degree of Protection:IP20
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC
Power supply:24 V DC (-15%/+20%)
NOVRAM:128 kB
Max. power consumption:27 W
Weight:approx. 1165 g
Dimensions (W x H x D):144 mm x 99 mm x 91 mm
Relative humidity:95%, no condensation
Operating/storage temperature:-25…+60°C/-40…+85°C
Control Cycle Time: 62.5 µs
Encoder Frequency: Up to 10 MHz
Voltage: 5V DC (from PCI bus)
Current Consumption: Typically < 1A
Operating Temperature: 0°C to 45°C
Humidity: 5% to 90% non-condensing
Storage Temperature: -20°C to 70°C
For liquid flow: 0.5 to 10,000 l/h
For gas flow: 1 to 1000 Nm³/h
Accuracy: Typically ± 1%
Analog Outputs:4-20 mA output
Operating Temperature:Typically -20°C to 60°C
Storage Temperature:Typically -20°C to 80°C
Voltage Rating: 400–690 VAC ±10%
Input Current: 1,100 A (maximum)
Frequency Range: 0–1000 Hz
Operating Temperature:-20°C to +50°C
Storage Temperature: -40°C to +70°C.
Humidity: 5% to 95% (non-condensing)
Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Analog Inputs:2
Analog Outputs:1
Number of Digital Inputs:6
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC
