28 3300 XL 8mm probe, selectablehazardous area approvals
05 0.5 m (20 in)
085 8.5 in (215.9 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
• 1/8 to 3/16 inches
• 1/4 to 5/16 inches
• 5/16 to 3/8 inches
023/4-14 NPT
3300 XL 8 mm Probe
M10 x 1 thread,without armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
16 3300 XL 8mm probe
05 0.5 m (20 in)
19 1.9 in (48.26 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
135 13.5 in (342.9 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
115 11.5 in (292.1 mm)
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Interface:RS-422/RS-485 (2 ports)
How connected:Multipoint
How communicates Half-duplex/Full-duplex
How synchronizes Start-stop synchronization
Transmission code ASCII/binary
Character length:7/8 bits
Stop bit :1/2 bits
Parity check None/even/odd
Transmission distance Maximum:1200 m
Current consumption:500 mA
Number of input channels:32
Rated input voltage:24 V DC
Input ON voltage:18 to 26.4 V DC
Input OFF voltage:5.0 V DC or less
Input current (at rated input voltage):4.1 mA±20 % / channel
Instantaneous allowable maximum input voltage:30.0 V DC
Input response time:8 ms or less
Minimum ON detection time:20 ms
Maximum ON/OFF cycle:25 Hz
Maximum current consumption:500 mA (5 V DC)
Number of input channels:8, isolated channels
Input frequency:0 to 10 kHz
Minimum input pulse width:40 μs
Shunt resistance Select from:OFF/200/500/1000 Ω
Pull-up resistance:68 kΩ (12 V DC or 24 V DC
Data refresh cycle:2 ms
Filter function Can select a filter that eliminates chattering
Transmitter power supply
Can select:24 V DC/12 V DC.
Number of output channels:64
Rated applied voltage:24 V DC
Load voltage:24 V DC, 100 mA
Field power supply voltagerange:20.4 to 26.4 V
Output ON voltage maximumvalue:2 V DC
Leak current maximum valuewhen output OFF:0.1 mA
Output format:Current sink
Number of input:channels16, non-isolated
Input signal:4 to 20 mA
Allowable input current/voltage:27 mA
Accuracy:±0.1% of full scale
Data refresh cycle:10 ms
Input step response time:100 ms
Transmitter power supply:22.8 to 26.4 V
Setting of 2-wire or 4-wiretransmitter
For each channel by setting pin
Allowable input voltage ±5 V.
Withstanding voltage :1500 V AC for 1minute
Power ON 2 MΩ or more
Power OFF 2 MΩ or more
Accuracy ±0.03% of full scale (for 0 to 400 Ω)
Allowable total resistance of signalsource plus wiring:40 Ω or less
(wiring resistance per wire)
Temperature drift:Max. ±30 ppm/°C.
Maximum current consumption:450 mA (5 V DC)
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital I/O: 24 V DC
Analog I/O: 4–20 mA, 0–10 V
Field-to-System: 1500 V AC reinforced isolation.
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% (non-condensing)
Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
Input Channels: 16 channels
Types: 4–20 mA, 0–10 V, RTD
Resolution: 16-bit ADC
Digital Inputs: 24 V DC
Field-to-System: 1500 V AC reinforced isolation.
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Voltage: 24 V DC (±10%)
Power Consumption: ≤6 W
Input Channels: 32 channels
Digital Inputs: 24 V DCc
Analog Inputs: 4–20 mA, 0–10 V, RTD
Channel-to-Channel: 250 V AC
Field-to-System: 1500 V AC reinforced isolation
Ethernet Port: 10/100 Mbps (RJ45) for integration with PLC networks
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Voltage: 24 V DC (±10%)
Power Consumption: ≤10 W
Processor: 32-bit ARM Cortex-R5F
Clock Speed: 500 MHz
Channels: 32 channels
Voltage: 24 V DC
Field-to-System: 1500 V AC reinforced isolation
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Vibration Resistance: 5–100 Hz
Voltage: 24 V DC (±10%)
Power Consumption: ≤15 W
RAM: 1–2 GB DDR3
Storage: 4–8 GB Flash
Video Input: VGA/HDMI for external display connectivity.
USB Ports: 2x USB 2.0/3.0 for peripherals
Voltage: 24 V DC (±10%)
Power Consumption: ≤15 W
RAM: 1–2 GB DDR3
Storage: 4–8 GB Flash
Video Input: VGA/HDMI for external display connectivity.
USB Ports: 2x USB 2.0/3.0 for peripherals (e.g., keyboard, mouse).
Ethernet: 10/100/1000 Mbps (RJ45) for network integration
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital: 24 V DC (sink/source).
Analog: 4–20 mA, 0–10 V
Analog inputs: ±0.05% of full scale (at 25°C).
Digital response time: ≤1 ms
Overvoltage Protection: ±30 V
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital: 24 V DC (sink/source).
Analog: 4–20 mA, 0–10 V
Analog inputs: ±0.05% of full scale (at 25°C).
Digital response time: ≤1 ms
Overvoltage Protection: ±30 V
Removable screw terminals (0.2–2.5 mm² / AWG 24–12)
Model: PFSK108
Part Number: YM322001-EH
Voltage: 24 V DC
Wire Gauge Support: 0.2–2.5 mm²
Max Current: 10 A
Digital I/O (24 V DC).
Analog signals (0–10 V, 4–20 mA).
Model: PFSK110
Part Number: YM322001-EP
Voltage: 24 V DC (±10%)
Power Consumption: ≤3 W
Voltage: 0–10 V, ±10 V
Current: 0–20 mA, 4–20 mA
Accuracy: ±0.1% of full scale (25°C)
Sampling Rate: 100 samples/sec per channel
Operating Temperature: -20°C to +60°C (-4°F to +140°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Vibration Resistance: 5–100 Hz
Model Number: PFSK106
Part Number: YM322001-EC
Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
Digital Inputs: 16 channels
Flash: 512 KB
Analog Inputs: 8 channels
Outputs per module 2 channel single-ended, nonisolated
Output current 0…20 mA
Resolution 12 bits, 1/4096 max, 4.88 µA/bit
Converted data Binary data 0000 to 0fff (max scale)
Conversion time 2 ms/channel
Overall accuracy 0.2% Full scale @ 0…55 °C
Calibration None required
Allowable external output load resistance600 Ω max
16 3300 XL 8mm probe
05 0.5 m (20 in)
15 Minimum length 1.5 in (38 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
15 Minimum length 1.5 in (38 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
15 Minimum length 1.5 in (38 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
15 Minimum length 1.5 in (38 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in)
15 Minimum length 1.5 in (38 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in
OtherRecommendation
Order in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in
OtherRecommendation
Order in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in
OtherRecommendation
Order in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
16 3300 XL 8mm probe
05 0.5 m (20 in
OtherRecommendation
Order in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
00 Probe not required
00 Probe cable not required
OtherRecommendationOrder in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plugOne 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets forthe following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
00 Probe not required
00 Probe cable not required
OtherRecommendationOrder in increments of 0.1 in (3 mm)
03One 3/4-14 NPT plugOne 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets forthe following cable sizes:
• 1/8 to 3/16 inches
• 1/4 to 5/16 inches
• 5/16 to 3/8 inches
023/4-14 NPT
Manufacturer: Alfa Laval
Model Number: 3183052091
Product Name: VCU-160 Module
Application: HVAC systems
Input Voltage: Typically 24V DC or 230V AC
Operating Temperature Range: -20°C to +55°C
Protection Rating: Typically IP20
Manufacturer: Alfa Laval
Model Number: 3183034171
Product Name: Heatpac Control Module
Application: HVAC systems
Input Voltage: Typically 24V DC or 230V AC
Operating Temperature Range: -20°C to +55°C
Number of Inputs: 14 digital Output
Input Type: Sinking or sourcing (configurable)
Input Current: Typically 5-10 mA per input
Isolation Voltage: Typically 500V AC between field and logic side
Response Time: Typically 1-10 ms
Analog: 20 mA max per channel
Number of Inputs: 16 digital inputs
Input Type: Sinking or sourcing (configurable)
Input Current: Typically 5-10 mA per input
Isolation Voltage: Typically 500V AC between field and logic side
Response Time: Typically 1-10 ms
Analog: 20 mA max per channel
01 Standard (use for standard monitoringapplications)
01 10Base-T/100Base-TX Ethernet
Consumption 10.5 Watts
Front Panel USB-B
MaximumCurrent<1 mAdc
Dry Contact toCommon
Series:Versamax
Part Number:IC200ALG263
Product Description :Analog Input Module
Number of Inputs:15, single-ended
Input Voltage:-10 Volts to 10 Volts
Input Impedance:100K Ohms minimum
Resolution:+/- 15 bits
Update Rate:7.5 ms
LED Indicators:OK LED
MICRONET SIMPLEX LV DISCRETE FTM
INPUT VOLTAGE RATING: 27.4 AMP 18-32 VDC
OUTPUT VOLTAGE RATING: 16 AMP 24VDC
POWER SUPPLY INPUT: (18 TO 32) V (DC)
SIGNAL TO ACTUATOR: 0 TO 200 MA
NETWORK ISOLATION: 0–60 HZ: 1000 VRMS
3300 XL 8 mm Probe
M10 x 1 thread,without armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
Input Voltage:Typically 24 VDC
Power Consumption:Around 25 W
Operating Temperature Range:Typically -20°C to 60°C
Storage Temperature Range:-40°C to 85°C.
Relative Humidity:5% to 95% non-condensing.
Series: Mark VI
Model Number: IS200AEADH4ADA
Type: Input Terminal Board
Input Voltage:
Typically operates at 24V DC
Operating Temperature Range:
-40°C to +85°C (-40°F to +185°F)
Input Voltage: Typically 24 V DC
Operating Temperature Range:
Typically -30°C to +70°C (-22°F to 158°F)
Storage Temperature Range:
-40°C to +85°C (-40°F to 185°F)
Number of counters:2
Inputs:3 on each
Input currents:1.4 mA at 5 V
Input impedance:3.7 kΩ
Counter resolution:24 bit
Min. pulse length:5 µs
Max. input frequency:100 kHz
Two -synchronous- processors
Flash memory for system and applicationprogram
RAM with battery backup (battery located inBKM-0001)
Data comparators for the processors and theirmemory
Minimum and maximum execution timemonitor
Memory error handler
1oo2D functionality
24V and 5V monitoring
Emergency Shut Down Input (24V)
Two outputs (for non-redundant resp.redundant IO)
Voltage at min. GAP:−1.6 V
Voltage at max. GAP:−17.6 V
Dynamic range:16 V
Output impedance:500 Ω
Short-circuit current:45 mA
Voltage:−20 to −32 V*
Current:−13 mA ±1 mA (−25 mA max.)
Type: Optical ESB Bus Repeater Module
Bus System: ESB
Connector Type: SC or LC connectors
Operating Voltage: Typically 24 V DC
Operating Temperature Range: -10°C to 60°C (14°F to 140°F)
Power Consumption: Typically low, around 3-5W
Processor:Typically powered by a PowerPC 7448
Memory:512 MB to 2 GB DDR2 RAM
CompactFlash or Solid-State Drive (SSD)
Bus Speed: 40 MHz
Voltage: Typically 5V DC
Power Consumption: 20-50W
Operating Temperature: Typically 0°C to 70°C (-40°C to +85°C)
Storage Temperature: Typically -40°C to +85°C.
Humidity: 5% to 95% relative humidity
Series:POINT I/O
Module Type:Serial Interface Module
Key Switch Position:2
Voltage Range:10-28.8 volts DC
Supply Voltage:24 volts DC nominal
Supply Current:15mA at 24 volts DC
Communication port protocol:Modbus Plus
Communication port support:RS232
Modbus Plus bridges and repeaters
characteristics:Programmable
Bridge
Mounting support:Panel Enclosure
Number of port:4
Rated supply voltage:115...220 V AC 24 V DC
Product Description:Serial Synchronous Interface (SSI) module
SSI Channels:1
Product Family:1734 POINT I/O
Supply Voltage:10-28.8 Volts DC
Part Number:1734-SSI
POINTBus Current:110 milliamps
Power Dissipation:0.94 Watts
No of SSI channels:One (1) SSI port
Supply current :110mA @ 24V dc
Operating Temperature:-20 to 55oC (-4 to 131oF)
Storage Temperature:-40 to 85°C (-40 to 185°F)
Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Incremental Scale Factor (ISF)
ISO: 8 V/mm (203.2 mV/mil) ± 5%@
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)@
temperature range 0 to 45°C(+32 to +113°F)
Minimum Shaft Diameter 25 mm (0.79”)
Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Incremental Scale Factor (ISF)
ISO: 8 V/mm (203.2 mV/mil) ± 5%@
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)@
temperature range 0 to 45°C(+32 to +113°F)
Minimum Shaft Diameter 25 mm (0.79”)
Input Voltage Range: Typically 24V DC
Output Voltage Range: Dependent on the connected load
Current Rating: Up to 10A
Power Rating: Typically around 240W
Operating Frequency: 1kHz to 20kHz
Part Number/Catalog No.:1734-CTM
Series:POINT I/O
Module Type:Terminal Module
Isolation Voltage:250 Volts Continuous
Field Power Supply:1-28.8 Volts DC or 12/240 Volts AC
Field Power Supply Current:4 amps/module
Overvoltage protection, max:± 30V DC
Overcurrent protection, max:±30 mA
Open circuit detection time:2 seconds
Module Keying:Electronic
Number of Inputs:8 Differential Inputs
Number of Outputs:N/A
Voltage Category:N/A
Input Voltage Range:+/- 10 Volts, 0-10 Volts, 0-5 Volts
Output Voltage Range:N/A
Power Dissipation:2.1 Voltage Mode and 2.4 Current Mode
Enclosure Type:None (Open Style)
Product Type: Safety Relay
Model Number: 440R-GL2S2P
Series: Guardmaster
Input Voltage: 24V DC
Voltage Tolerance: -15% to +10%
Current Consumption: Approx. 200mA
Power Consumption: Typically 4.8W
Relay Output Type:
Safety Outputs: 2 NO
Auxiliary Outputs: 1 NC
Product Line:SMC-Flex
Part Number/Catalog No.:150-F43NBD
Bulletin Number:Solid-State Controller
Controller Ratings:480 Amps,
400 Horsepower at 460 Volts AC
Input Line Voltage:200 to 460 Volts AC
Control Voltage:120 / 240 VAC
Rated Voltage:500 to 575 Volts AC
INVERTER TRIGGER DRIVER BOARD
PROTECTION
Rated Voltage (V_CE):650V
Rated Current (I_C):70A
Peak Current (I_C_peak):Up to 180A
Power Dissipation:150W to 300W
Switching Frequency:Up to 20 kHz
Thermal Resistance (R_thJC):1.5°C/W to 2.5°C/W
Junction Temperature (T_j):-40°C to 150°C
Local Bus Power +5 VDC at 1.4 A
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985
AirborneContaminants Class G3
