Input Types:4 V, C, or 3 TC, or 2 RTD, Resistance
Resolution:18 bits
Input Overvoltage Protection:+24 VDC continuous
Input Overcurrent Protection:32 mA continuous
Backplane Current Required:15 mA at 5 V maximum 20 mA at 24 V maximum
Common Mode Rejection:<96 dB at 50/60 Hz
Normal Mode Rejection:65 dB to 74 dB at 50/60 Hz
Thermal Dissipation:1.00 Watt, maximum
I/O Capacity:8
Communication Rate:5 Mbps
Output Power:5.4 Volts DC
Power Supply:9.5 Volts DC
Power Consumption:8.5 W
Power Dissipation:8.5 W
Thermal Dissipation:29 BTU/hour
SCALANCE XB205-3LD
managed layer 2 IE switch
5x 10/100 Mbit/s RJ45 ports
3x SM FO SC-port 1x console port,
diagnostics LED redundant power supply
IEC62443-4-2 certified
temperature range 0 °C to +60 °C
DIN-rail mounting; defaultPROFINET
Configurable high-pass and low-pass filters
Frequency range: 0.5 Hz to 20 kHz
Optional integrator to produce a velocity output
Optional 2-wire current or 3-wire voltagetransmission
Certified for use in potentially explosiveatmospheres
A range of installation options are available
Configurable high-pass and low-pass filters
Frequency range: 0.5 Hz to 20 kHz
Optional integrator to produce a velocity output
Optional 2-wire current or 3-wire voltagetransmission
Certified for use in potentially explosiveatmospheres
A range of installation options are available
Model Number: 51196694-350/U1
AID-3 9395-00379-034/B
Key Layout: 101 keys, including a numeric keypad.
Cable Length: 3 meters.
Compatibility: Designed for use with
Honeywell industrial control systems
Product Type:FLEX Ex RTD Thermocouple I/O Module
Inputs:8
Input Type:Internal Bus Configurable
Signal Input Range:40 to 100 millivolts
Lead Resistance Compensation:15 Watts maximum
Settling Time:8 milliseconds
Module Field-side Power Consumption:1.6 Watts
Power Dissipation:1.6 Watts
Thermal Dissipation:5.46 BTU/hour maximum
Power Supply:9.5 Volts DC
IE/PB link PN IO
gateway between Industrial Ethernet and PROFIBUS
PROFINET IO proxy with real-time communication
time-of-day synchronization viaSIMATIC processes
NTP, SNMP v1, LLDP
S7 routing, data record routing
connection of up to 64 S7/DPV0/DPV1 slaves
support of DP/PA link and DP/FFlink
10/100 Mbit/s fast Ethernet, MRP
9.6 Kbit/s up to 12 Mbit/s PROFIBUS
firmware loading via configuration tool
redundant power supply
firmware versionV4.0.
Diode Matrix: -10V> +10V
Current measurements: 4-20mA
Temperature measurements: NTC probe
Operating temperature -20 to +70˚C (-4 to 158˚F)
Storage temperature -40 to +85˚C (-40 to 185˚F)
ON state Voltage, min:6VDC
ON state Voltage, max.26.4VDC
ON state Voltage, nom:24VDC
Enclosure:Open-type
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration: 5g @ 10 to 500 Hz
Operating Shock:30 g
Product Type:Flex I/O 4 Channel Pulse Counter Module
Inputs:2 per Interface
Pulse Counter Interfaces:4
Part Number:1794-IF8IH
Outputs:None
Inputs:8
Input type:single-ended, non-isolated
Operating temperature:32 to 131 degrees Fahrenheit
Enclosure:Open
Conversion:Sigma Delta
Dimensions:3.7 x 3.7 x 2.6 inches
External DC voltage rating:19.2 to 31.2 Volts DC
Series:Compact 5000 I/O
No. of Outputs Eight (8) DC output channels
Output Voltage signal, nominal:24VDC
Output Voltage Signal range:10-32VDC
Pulse width, min:200 µs @ 0.5 A @ 25 °C (77 °F)
No. of output groups:Two (2)
Number of Outputs:8 (2 Groups of 4) Channels
Voltage Category:24 Volts DC
Input Voltage Range:N/A
Output Voltage Range:10-32 Volts DC
Power Dissipation:3.2 Watts
Product Type:Programmable Automation Controller
Module Type:Processor Module
Communication:Ethernet
Communication ports:(1) USB; (2) Ethernet I/P; 1 RS232
Supported Protocols:ASCII; DH485; DF1; Ethernet
No. Of Axes over Ethernet:2 axes
Shipping Weight:3 pounds
No. of Task:32 Task
Shipping Dimensions:11X8X6 inches
No. of Program per Task:100
Series:A and B
Product Line:CompactLogix
Product Type:Programmable Automation Controller
Module Type:Processor Module
Communication:Ethernet
Communication ports:2 Ethernet I/P; 1 USB
Motion Control over Ethernet I/P:Included
Integrated Motion:4 Axes
Memory:1MB
Shipping Weight:3 lbs.
Maximum number of I/O modules supported:8 Modules
MICROMASTER 440 WITH BUILT-IN CLASS A FILTER3AC
380-480 V +10/-10% 47-63
HZ CONSTANTTORQUE POWER 3 KW
OVERLOAD 150% 60 S,200% 3 S
SQUARED TORQUE POWER 3 KW
202 X149 X 172 (H X W X D)
PROTECTION IP20
AMBIENTTEMP. -10 TO +50 DEG. C
WITHOUT AOP/BOP
Series:ControlLogix
Module Type:Isoloated Analog Output Module with current loop
Outputs:6-Point Isolated
Backplane Current (5Volts):250 milliamps
Backplane Current (24 Volts):300 milliamps
Power Dissipation (Max):4.9 Watts at 60 Celsius
Number or ports:2; 1 (RS232); 1 Ethernet I/P
Ports:RS-232
Protocol:DF1 Full-Duplex; Ethernet
Ethernet Transmission speed:Series A and B: 10 mbps Series C and D: 10/100 mbps
Safety Feature:Master Control Relay
Mounting:DIN Rail or Panel
Power Supply: 20.4 to 26.4V dc
24 Volts DC Current Draw:50 mA typical, 100 mA maximum
Item weight:1 pound
Product Type:Isolated Serial Port
Mounting Torque:0.2 Nm
Terminal Screw Torque:0.22-0.25 Nm
Isolated Voltage:500V AC
Surrounding Air Temperature max:65* C
Power Supply: 24 VDC
Power Consumption: 3.5 W
Operating Temperature Range:
-40°C to +65°C (-40°F to +149°F)
Storage Temperature Range:
-40°C to +70°C (-40°F to +158°F)
Relative Humidity: 0 to 100% RH
Supply Voltage:85-250 VAC V ; 9-32 VDC V
Temperature Operating Range:0 to +50 °C °C
Termination:Screw
Pulse Rate (Frequency) - Analog Converter
Output Type:Current, Voltage
DeviceNet Voltage Range:11 to 25 Volts DC
Current Consumption:230 milliamps at 24 Volts DC
Voltage, On-State Input max.:11 Volts DC
Voltage, Off-State Input max.:5 Volts DC
Input Current:4.5 milliamps
Test Output Type:Current Sourcing
Pulse Test Output Current:0.7 Amps
Output Current:0.5 Amps
Output Surge Current:0.5 Amps
SIMATIC DP
Master-Modul IM 180 für
PROFIBUS-DP,max
12 MBaud
Nennwert (DC):5 V
Stromaufnahme, typ. :250 mA
Prozessortyp:80C165 (40 MHz)
Art des Speichers:2x 128 kbyte
Schnittstellen/Bustyp:Dual-Port-RAM
VM600 series
Humidity: 5% to 95% non-condensing
Vibration: 0.15 g²/Hz (5 to 500 Hz)
Shock: 15 g (11 ms half-sine)
Operating Temperature Range: -20°C to +60°C (-4°F to +140°F)
Storage Temperature Range: -40°C to +85°C (-40°F to +185°F)
Output Type:4-20 mA
Output Channels:16
Output Temperature Drift:0.005% of Full Scale/°C
Output Readback Accuracy:±4% of Full Scale
Resolution:± 0.05% of Full Scale
Directly Settable Output Current Range:0 mA, 2.9 mA to 21.1 mA
Maximum Resistive Load:800 ohms
Maximum Open Circuit Voltage:22 V
Memory Size:8 MB, 16 MB, or 32 MB
Data Transfer Rate:Up to 43 MB/s
Node Support:Supports up to 256 nodes
Connectors:
ST-style fiber-optic connectors
Power Requirements:+5 VDC
Storage Temperature:-40°C to +85°C
Operating Temperature:0°C to +60°C
Input Type:4-20 mA
Input Voltage:24 V DC
Input Range:4-20 mA
Signal Isolation:1500 V to 2500 V
Accuracy:accuracy of ±0.1%
Operating Temperature Range:0°C to 60°C (32°F to 140°F)
Power Supply:24 V DC
LC1D11500F7C
Telemecanique,
Schneider Electric
TeSys D Series
non-reversing contactor
type LC1D, 3P, 3PH, 250A
600V, 30kW @ 220V, 55kW @ 380V
60kW @ 600V,complete with 110V AC coil
AC magnetic contactor
suitable for use with
LC1-D series motor control systems
Current Rating:300 A
Sensor Type:Closed Loop
Brand:Honeywell
Maximum Operating Temperature: + 85 C
Minimum Operating Temperature: - 40 C
Product Type: Industrial Current Sensors
Subcategory:Sensors
SIPART PS2 Smart
electropneumatic positioner
4...20mA, HART, Ex/nEx
double-acting, polycarbonate enclosure
for pneumatic linear and part-turn actuators
Non-contacting (wear-free) position detection (NCS)
Standard Without explosion protection
Connection thread el.: M20x1.5 / pneu
G 1/4 Without limit monitor.
Without option module
SIRIUS soft starter S00 17.6 A
7.5 kW/400 V
40 °C 200-480 V AC
24 V AC/DC Screw terminals
product brand name SIRIUS
product designation Soft starter
degree of pollution 3, acc. to IEC 60947-4-2
