ALL MANUFACTURERS

Digital temperature regulator

Temperature Range: Typically -50°C to 300°C
Accuracy: ±0.1°C
Input Voltage: 100-240 VAC, 50/60 Hz
Output Type:4-20 mA or 0-10 V 
Operating Temperature Range: Typically -10°C to +60°C
Storage Temperature Range: Typically -20°C to +70°C

CYLINDRICAL PHOTOELECTRIC SENSORS

Housing design (light emission) Cylindrical
Housing length 70.2 mm
Thread diameter (housing) M18 x 1
Optical axis Axial
Sensing range max. 0.05 m ... 7 m
Sensing range 0.05 m ... 6 m
Type of light Visible red light
Light source LED
Adjustment Potentiometer, 270

Eddy Current Displacement Sensor

Operating temperature range: 0...+ 100°C
Operating frequency range: 0...15 kHz (-3dB) 
Displacement measuring range: 2,15 mm
Sensitivity: 7,87 V/mm (200 mV/mil)
Mean voltage: -10,00 V
Power supply: -24 V nominal 
Standard cable: 4 - core (4 x 0,2 mm2) 

CONNECTING CABLE

Connecting cable 
shielded for SIMATIC S7-300/1500 
between front connectormodule and 
Connection module 16x0.14mm
2 with IDC connectors, L = 1.0 m

PCB CARD

Operating Voltage:120/230 V AC
Current Rating :16 A
Power Output :1.6 kW
Communication Interface:Profibus DP
Control Signals:Up to 16 digital inputs and outputs
Temperature Range:-25°C to 55°C

Analog I/O module

SIMATIC S7-1500
Analog I/O modules
Fully modular connection
Connection module
at DC / rated value 24 V
rated value 50 V
at DC / maximum 50 V
current / rated value 1 A
during operation 0 ... 60 °C
during storage -40 ... +70 °C

SIMATIC S7-1500
mounting rail 245 mm (approx. 9.6 inch)
incl. grounding screw
integrated DIN rail for mounting of 
incidentals such as terminals
automatic circuit breakers and relays

CPU MODULE

SIMATIC S7-1500
CPU 1511-1 PN
central processing unit with work 
memory 300 KB for program 
and 1.5 MB for data, 1st interface
PROFINET IRT with 2-port switch
25 ns bit performance
SIMATIC Memory Card 

Memory card

SIMATIC S7
memory cards for 
S7-1x00 CPU/SINAMICS
3, 3V Flash
12 MB

Abaco Systems RXI Box IPC

Dual Core COM Express CPU Module
Fanless Design
(2) Gigabit Ethernet Connectors
Operating Temperature Range of -25°C to +65°C

RX3i CPL410 Controller

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirements
Input Power (Max) - 20 Watts
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPE400 Controller

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirements
Input Power (Max) - 20 Watts
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPL410 Controller CPU

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts, 
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPL410 Controller CPU

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts, 
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

SIMATIC S7-200 SMART
CPU ST30, Standard CPU
DC/DC/DC,onboard 
I/O: 18 DI 24 V DC; 12 DO 24 V DC
Power supply: DC20.4-28.8V DC
Program/data memory 30 KB

Digital output module

Product type designation DQ 8x24VDC/2A HF
HW functional status FS03
Firmware version V2.2.0
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Current consumption, max. 40 mA
Rated value (DC) 24 V
Power available from the backplane bus 0.9 W

Analog input module

SIMATIC S7-1500 Analog input module
AI 8xU/I/R/RTD BA
16 bit resolution,Accuracy 0.5%, 8 channels in groups of 8
Common mode voltage 4 V DC,Diagnostics
Hardware interrupts; Delivery including infeed element
shield bracketand shield terminal
Front connector (screw terminals or push-in) 
to be orderedseparately

VARISTOR BOARD MODULE

Operating Voltage Range: 12V to 48V DC
MCOV: Typically around 48V DC
Temperature Range: -40°C to +85°C

Robot Electronic Calibrator SEMD

The thinner cable is the signal cable. 
It connects theSEMD or MEMD to the mastering box. 
The thicker cableis the EtherCAT cable. 
It is connected to the mastering boxand to the robot at X32.
Description of adjusting set withSEMD and MEMD 
(Micro Electronic Mastering Device)

Robot Servo Motor

Rated Power: 2.5 kW
Rated Speed: 3000 RPM (supports high-speed operation)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 6 A
Rated Frequency: 50 Hz
Torque Constant: 6.5 Nm/A
Noise Level: 68 dB(A) at rated load 

Gear-motor

Rated Power: 1.5 kW
Rated Speed: 1500 RPM 
Rated Voltage: 400 V (3-phase AC)
Rated Current: 4 A
Rated Frequency: 50 Hz
Insulation Class: F 
Gear Ratio: 10:1 

Servo Motor

Rated Power: 5.0 kW
Rated Speed: 3000 RPM (high-speed capability with variable speed control)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 12.5 A
Rated Frequency: 50 Hz
Torque Constant: 22 Nm/A
Service Factor: 1.2 

Servo Motor

Rated Power: 7.5 kW
Rated Speed: 3000 RPM (variable speed operation)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 16 A
Rated Frequency: 50 Hz
Torque Constant: 28 Nm/A
Service Factor: 1.4 

Servo Motor

Rated Power: 5.5 kW
Rated Speed: 3000 RPM (Variable speed capability)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 12 A
Rated Frequency: 50 Hz
Torque Constant: 18 Nm/A
Service Factor: 1.5 

MOTOR AXIS

Rated Power: 6.5 kW
Rated Speed: 3000 RPM (Variable Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 13 A
Rated Frequency: 50 Hz
Torque Constant: 24 Nm/A
Service Factor: 1.3