
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:302 Amps, 160kW ND, 132kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:260 Amps, 132kW ND, 110kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:260 Amps, 132kW ND, 110kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
3300 NSv Extension Cable
065 6.5 meters (21.3 feet)
04With stainless steel armor
withFEP jacket, with connectorprotector
3300 XL 8 mm Probe
3300 XL 8 mm Probe
M10 x 1 thread,with armor
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector with
connectorprotector, standard cable
3300 NSv Proximity Probes
3300 NSv Probe
M8X1 thread, witharmor
05 0.5 meter (20 in)
01Miniature coaxial ClickLoc
connectorwith connector protector, standardcable
3300 XL 8 mm Probe
3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector with
connectorprotector, standard cable
05 CSA, ATEX, IECEx Approvals
PanelView Plus 6 Operator Terminal
Manufacturer:Rockwell Automation
Product Family:PanelView Plus 6 Operator Terminal
Memory:512 MB Flash/ 512 MB RAM
Compatible Hardware:PanelView Plus 6 700-1500
Status indicators:Red and Green LED
Interfaces:Ethernet port, serial port, two USB ports
CompactFlash card slot
Marine Certified:Yes
Operating Temperature:0-55 Degree Celsius
Power input:24VDC
Power Dissipation:70 Watts
Digital Output IOTA Redundant
Output Channels:32
Output Type SINK: (Open Drain)
Load Current :0.1 A per channel (Max)
On-State Voltage 0v VDC (load current @:0.1A max
Off-State Voltage:24 V (typ),
Off-State Leak Current:100 µA (max)
Turn-On/Turn-Off Time:10 ms (max)
Digital Input IOTA Redundant
Power supply:24V DC
Rated Current:55mA at 24V
Power Consumption:1.32W at 20mA
Power/DCS to Field:1500 VAC
DCS side connections:
37 pin DSUB connector on CC-UGIA01
Voltage Input:24V DC
Interface to DCS:4 to 20mA with HART
Analog Output IOTA Redundant
Power supply 24V DC
Rated Current 55mA at 24V
Power Consumption 1.32W
Power/DCS to Field 1500 VAC
DCS side connections 37 pin
DSUB connector on CC-UGIA01
Voltage Input 24V DC
Current Input 4 to 20mA with HART,
CC-UGAI01 in sink mode.
Open wire current <150uA
Velomitor CT Transducer
0 7 Plate Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 0 No Approvals
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
AmplitudeLinearity:±2% to 63.5 mm/s pk(2.5 in/s pk)
3300 NSv Proximity Probes
330902 3300 NSv Probe
1/4-28 UNF thread,with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.0 in
10 1.0 meter (39 in)
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
05 Multiple Approvals
3300 NSv Proximity Probes
3300 NSv Probe
1/4-28 UNF thread,with armor
10 1.0 meter (39 in)
01Miniature coaxial ClickLoc connectorwith
connector protector, standardcable
05 Multiple Approvals
Interconnect Cable
Two-conductor 18 AWGtwisted,
shielded cable withright angle
two-socket plugat one end,
terminal lugs atthe other end.
Used withmonitors and with
21128Velocity Transducer Housing.Min.
length: 2.0 ft (0.6 m)
Max. length: 99 ft (30 m)
Armoured Extension Cable
Capacitance: Low capacitance < 50 pF/m
Temperature Range: -40°C to +150°C (-40°F to +302°F)
Impedance: 50–100 Ω
3300 XL 8 mm Proximity Probes
3300 XL 8 mm Probe, 3/8-24 UNFthread
without armor
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector with connectorprotector
standard cable
05 CSA, ATEX, IECEx Approvals
Velomitor CT Velocity Transducer
1 2 Plate Stud 3/8-in 24 to M8x1
0 0 MIL-C-5015 connection interface
0 1 through0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)
Velomitor Piezo-velocity Sensors
01 1/2 - 20 UNF
Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range:1270 mm/s (50 in/s) peak.
TransverseSensitivity:Less than 5% of sensitivity.
AmplitudeLinearity:±2% to 152 mm/s (6 in/s)peak.
OperatingTemperatureRange:
-55°C to 121°C(-67°F to 250°F)
ControlLogix Discrete output module
Outputs:16-Points
Module Type:Digital AC Output Module
Voltage:120-140 Volts AC
No. of Outputs Sixteen (16) mechanically fused
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Backplane Current at 5 Volts:400 mA
Generic Servo Interface Module
Series:ControlLogix
Module Type:Generic Servo Interface Module
Axes per Module:8
Axes per Controller:32
Backplane Current (5Volts):760 milliamps
Backplane Current (24Volts):2.5 milliamps
Power Dissipation:6.2 Watts
SERCOS Data Rate:4 or 8 Megabits-Second
Current Draw (5.1 Volts):1.2 amps
Thermal Dissipation:21.2 BTU-hour
Isolation Voltage:50 Volts Continuous
SINGLE MOTOR MODULE
SINAMICS S120
SINGLE MOTOR MODULES
INPUT: 600 V DC
OUTPUT: 3-PH 400 V,
210 A FRAME SIZE: CHASSIS
INTERNAL AIR COOLING SUPPORT
OF THE EXTENDED SAFETY
INTEGRATED FUNCTIONS
INCL. DRIVE-CLIQ CABLE
power block
SINAMICS
replacement power block
for 510-750 V DC
380 A Motor Module
3 phases painted modules
and nickel-plated busbars
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.