ALL MANUFACTURERS

CONTROL COMMUNICATION GATEWAY

Input Voltage: 24 VDC nominal 
Power Consumption: ≤ 15 W
Ethernet Ports: Dual 10/100 Mbps
Operating Temperature: -30°C to +70°C (-22°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Data Transfer Rate: Up to 100 Mbps

INTERFACE BOARD

Input Voltage: 5 VDC (typical)
Power Consumption: ≤ 2 W
Signal Type: Digital and analog signal transmission
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing

AC SERVO MOTOR

Rated Power: Typically 0.5 to 1.0 kW
Rated Voltage: AC 200-240V
Rated Speed:  3000 RPM
Shaft Diameter: Generally around 14 mm
Mounting Type:  flange-mount 
Operating Temperature Range: Typically -10°C to 40°C
Storage Temperature Range: Often between -20°C to 60°C

POWER CABLE

24 VDC 
POWER CABLE
28" - LAMBDA 
P/N - P0916GX

I/O Bus Cable

4000056002
I/O Bus Cable
Operating Temperature Range:  -40°C to +70°C
Insulation Material: PVC
CABLE ASSEMBLY 6FEET

TERMINAL CABLE

TERMINAL CABLE
CABLE ASSEMBLY
FBM2XX
TYPE 4
3M LENGTH

Term Cable

FBM 2xx
TYPE 1 
TERM CABLE
3 METERS
P/N - P0916DC

Memory Card

Memory capacity 32/64 MB
Access width 16 bits
Designed as 5 V card
Program voltage of 12 Vss
Write protection via operating software

Vibration Sensor Input Module

Channels 10-12 can be 
used as an analog input of ±10 V
Analog inputs individually 
configurable for sensitivity
24 bit A-D resolution with a 
dynamic range ≥ 96 dB
Adjustable sampling 
rate up to 51.2 kHz
Adjustable analog and digital filtering

ETHERNET/IP-ETHERNET/IP

Part Status Active
Function Gateway
Modulation or Protocol EtherNet/IP™
Applications General Purpose
Interface RJ-45 Ethernet
Data Rate (Max) 1Mbps
Operating Temperature °C Min -25 °C
Operating Temperature °C Max 65 °C
Storage Temperature °C Min -40 °C
Storage Temperature °C Max 85 °C

SPINDLE DRIVE BOARD

POWER CONNECTION MODULE
DC300 SPINDLE DRIVE BOARD
CNC
Input/Output: typically 0-10V, 4-20mA
Operating Temperature Range: Typically -40°C to +70°C
Power Input: Receives AC or DC

Industrial Relays

KUEP Series
Contact Current Class = 5A to 10A Class, LessThan 16A
Contact Rated Current = 10 A
Terminal Type = Quick Connect, Solder
Contact Arrangement = 1 Form X (NO,Bridging)

POWER RELAY

Rated current AC-1:  16 A
Rated current DC-1: 10 A
Rated current DC-13: 2 A
Rated voltage AC: 400 V
Rated voltage DC: 220 V
Minimum current: 10 mA
Minimum voltage: 10 V
Versorgungsspannung: AC
Nominal supply voltage min.: 115 V
Nominal supply voltage max.: 115 V

DC Power Supplies

Input voltage 20 to 30 Vdc
Low Voltage DC Power Supply
Legacy Low Voltage DC PowerSupply Module
SupplyOK LEDIndicates when 
the power supply isoperating properly
Operatingtemperature -30 °C to +65 °C-22 °F to +150 °F
Storagetemperature -40 °C to +85 °C-40 °F to +185 °F
Humidity 95%, non-condensing

MICRO ANALOG BOARD

Input/Output: 
typically 0-10V, 4-20mA
Operating Temperature Range: 
Typically -40°C to +70°C
Function: 
Processes and converts analog signals

Digital I/O Module

Nominal Voltage Options: 
24 VDC, 48 VDC, 125 VDC, or 250 VDC.
Input Voltage Range: ±20% of nominal value
Logic 0 (Low): 0-3 V
Logic 1 (High): 15-250 V 
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)

Control Module

POWER SYSTEM 
16AMP 115V
AC/DC DISTRIBUTION 
115V 50/60HZ

CONTROL COMMUNICATION GATEWAY

Power Supply: Typically 24V DC
Operating Temperature Range: Typically -40°C to +85°C
Storage Temperature Range: -40°C to +85°C.
Humidity: humidity up to 95% (non-condensing).

Prolinx Communication Module

Power Supply 24 VDC nominal 
Current Load 500 mA max@ 24 VDC 
Operating Temperature –20 to 50°C (–4 to 122°F)
Storage Temperature –40 to 85°C (–40 to 185°F)
Relative Humidity 5 to 95% (non-condensing) 
Configuration SerialPortDB-9M RS-232 only
No hardware handshaking 

General Purpose Relays

Product:Power Relays
Type:Miniature
Coil Voltage:24 VDC
Relay Contact Form:2 Form C (DPDT-NO, NC)
Contact Current Rating:10 A
Contact Termination:Plug Pin
Mounting Style:Socket
Switching Voltage:250 VAC, 125 VDC
Coil Termination:Plug Pin
Coil Type:Non-Latching

General Purpose Relays

Product:Power Relays
Type:Standard
Coil Voltage:220 VAC to 240 VAC
Relay Contact Form:4 Form C (4PDT-NO, NC)
Contact Current Rating:5 A
Contact Termination:Plug Pin
Mounting Style:Socket
Switching Voltage:250 VAC, 125 VDC
Coil Termination:Plug Pin
Coil Type:Non-Latching
Coil Resistance:18.79 kOhms

Bi-power Relay

2-pole
Single contact
With operation indicator
Plug-in Terminals
24 VDC

Hybrid Power Relay

Series G9H
Packaging Bulk
Part Status Obsolete
Mounting Type Socketable
Circuit SPST-NO (1 Form A), Hybrid
Output Type AC
Voltage - Input 9.6 ~ 14.4VDC
Voltage - Load 100 V ~ 240 V
Load Current 10 A
Termination Style Plug In
Operating Temperature -25°C ~ 60°C
Approval Agency
CSA, UR

Process Interface Board

Voltage Rating:24V DC
Operating Temperature Range: -10°C to +60°C
Storage Temperature Range: From -20°C to +70°C
Humidity: humidity up to 95% (non-condensing).
Overcurrent Protection: Yes
Overvoltage Protection: Yes
Short-Circuit Protection: Yes
Ingress Protection: Typically rated IP20 or higher, 
depending on the enclosure and environmental requirements.

Control Card

Voltage Rating:24V DC
Operating Temperature Range: -10°C to +60°C
Storage Temperature Range: From -20°C to +70°C
Overcurrent Protection: Yes
Overvoltage Protection: Yes
Short-Circuit Protection: Yes
Ingress Protection: Typically rated IP20 or higher, 
depending on the enclosure and environmental requirements.