General Electric

Bus Interface Unit

Series:Field Control
Manufacturer:GE Fanuc
Part Number:IC670GBI002D
Series:Field I/O control
Type:Bus interface unit
Part Number:IC670GBI002
CPU Redundancy:Supported
Supply Voltage range:18-30 VDC
Nominal supply voltage:24 VDC
Frequency:47 to 63 Hertz
Power consumption:16.8 Watts
Power Supply Output:6.5 VDC ±5%

CPU module

Series:RX3i PacSystem
Part Number:IC695CPE330-AFAT
Product Type:CPU module
Processor Clock Speed:1.0 Ghz
RAM:64 MB
NVRAM:64MB
I/O Points:up to 32 K I/O
Controller Redundancy:Supported
Maximum Program Blocks:512
Maximum Block Size:128 kilobytes

I/O PACK

I/O PACK
SPEEDTRONIC GAS TURBINE CONTROL
MARK VI SERIES
TURBINE INPUT / OUTPUT
PRIMARY TURBINE PROTECTION
REGULATES HRSG (BOILER)

PROFINET Controller Gateway Module

Series:Mark VIe/Mark VIeS
Product Type:PROFINET Gateway Module
Processor Type:1066 MHz EP80579 Intel
Operating Temperature:22 to 149°F
Manufacturer:General Electric

op Box A Module Board

Series: Mark VIe
Channels: Configurable for 16–32 analog/digital channels
Analog: 4–20 mA, 0–10 V, RTD
Digital: 24 VDC dry/wet contacts
Supply Voltage: 24 VDC nominal
Power Consumption: Typically ≤ 8 W
Operating Temperature: -40°C to +70°C (-40°F to +158°F)

Top Box B Module

Series: Mark VI 
Supply Voltage: Typically 24 VDC 
Power Consumption: Varies by load 
Operating Temperature: -40°C to +70°C
Humidity: 0–95% non-condensing

Input Terminal Board

Series: Mark VI
Model Number: IS200AEADH4ADA
Type: Input Terminal Board
Input Voltage: 
Typically operates at 24V DC
Operating Temperature Range: 
-40°C to +85°C (-40°F to +185°F)

CIRCUIT BOARD

Input Voltage: 
Typically operates at 24V DC
Operating Temperature Range: 
-40°C to +85°C (-40°F to +185°F)
Serial Communication: RS-232/RS-485 

Digital Input Module

DIGITAL INPUT MODULE
24VDC
SOURCE
64 POINT

Vibration Monitor I/O Pack

Ambient Temperature Range:-30 to 65 °C
Board Compatibility:Vibration Terminal Board (TVBA)
Channels Thirteen for Proximity and Vibration
Common Mode Voltage Min:5 VDC
Frame Rates:3.125, 6.25, 12.5, 25, 50, and 100 Hz
Functional Acronym/Abbreviation:PVIB
LED Indicators:4
Probe Power:-24 VDC, 12 mA load per transducer
Status LEDs:Attn, Pwr, Link, TxRx

Analog input module

Series:PACSystem RX7i
Module Type:Analog Input
Number of Inputs:8 single-ended or 4 differential input channels
Input signals, Current:0-20 mA; 4-20 mA; +/-20 mA;
Product Description Analog input module
Current Range:0-20 mA, 4-20 mA, +/-20 mA

Processor-based VME (VMEbus) single board computer

Up to 512MB PC133 SDRAM
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port

Digital Signal Processor Board

CONTROL BOARD
DIGITAL SIGNAL PROCESSOR
60 MHZ
MARK VI
Clock Frequency:Up to 200 MHz
Program Memory:512 KB Flash 
Input Voltage:Typically 12 V DC 
Power Consumption:Approximately 3–5 W 

Control Memory Xchange Module

Data Transmission Rate: 2.12 Gbaud
Reflective Memory Capacity: 16 MB SDRAM
Access Time: 200 to 400 nanoseconds
Node Capacity: Supports up to 256 nodes in a network
Connectors: Fiber optic LC type, conforming to IEC 61754-20
Operating Voltage: +5 VDC (from power supply)
Current Requirements: 1.8 Amperes

Emergency Turbine Protection I/O Pack

Input Voltage Range: 85–264 V AC
Output Voltage: 24 V DC
Output Current: 10 A
Efficiency: 88%
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity Range: 5% to 95% non-condensing
Power Consumption: Approximately 25 W

PROTECTION RELAY

Ambient Humidity Maximum:Up to 95% non condensing
Dimensions:approx: 11.5 in H x 5.5 in W x 8.5 in L
Display Version:Enhanced
Fuse:3.15 A H 250 V
Input Power:110-250VDC 100-240VAC
Manufacturer:GE Multilin
Model Number:369-HI-R-M-0-0-0-E
Phase Current Input:1 A and 5 A secondary

Safety Controller Module

Microprocessor: 1066 MHz Intel EP80579
Operating System: QNX Neutrino
Operating voltage: 24 VDC
Operating Temperature: -10°C to +60°C.
Storage Temperature: -40°C to +85°C
Memory:4GB to 16GB RAM
Modbus TCP/IP, Profibus DP

UCSB Controller Module

Operating voltage: 24 VDC
Operating Temperature: -10°C to +60°C.
Storage Temperature: -40°C to +85°C
Memory:4GB to 16GB RAM
Modbus TCP/IP, Profibus DP

UCSB Controller Module

Operating voltage: 24 VDC
Operating Temperature: -10°C to +60°C.
Storage Temperature: -40°C to +85°C
Memory:4GB to 16GB RAM
Modbus TCP/IP, Profibus DP

Safety Controller Module

Number of channels: 24
Power supply voltage: 28 V dc
Analog output current: 0-20 mA
ControlST Software Suite Version: V06.01
Voltage Range: 14 to 32 V dc
Outputs: 24 V dc
Mounting: DIN-rail mounting
Technology: Surface mount
Operating temperature: -30 to 65°C

Mark VIe controller

Processor:1066 MHz EP80579 Intel Processor
Operating Voltage:Variable
Input Channels:2 Hall Effect Pulse Inputs, 2 Analog Inputs
Output Channels:4 Digital Input/Output Channels
Certifications:CE, RoHS Compliant

Mark VIe controller

Processor:1066 MHz EP80579 Intel Processor
Operating Voltage:Variable
Input Channels:2 Hall Effect Pulse Inputs, 2 Analog Inputs
Output Channels:4 Digital Input/Output Channels
Certifications:CE, RoHS Compliant

High-Speed Industrial Control Module

Processor:1066 MHz EP80579 Intel Processor
Operating Voltage:Variable
Input Channels:2 Hall Effect Pulse Inputs, 2 Analog Inputs
Output Channels:4 Digital Input/Output Channels
Certifications:CE, RoHS Compliant

Quad Core Controller

Mark VIe Controller
Altitude for Normal Operation :
0-1000 m at 101.3 to 89.9 kPa
Memory Type:
2 GB DDR3-1066 SDRAM
with error correcting code

VersaMax CPUE05 Controller

Program Storage:System flash, battery-backed RAM
Power Requirements:5V uses 220mA, 3.3V uses 570mA
Floating :Pointyes
Boolean Execution Speed:0.8 ms/K (typical)
Realtime Clock Accuracy (for timer functions):100ppm (0.01%) or +/- 9sec/day
Time of Day Clock Accuracy:100ppm at full temperature range
Embedded Communications:RS-232, RS-485, Ethernet
Configurable Memory:64K bytes maximum
Ethernet Data Rate:10Mbps (half- or full-duplex)
Ethernet Port:RJ-45, UTP
Number of SRTP Server Connections:8

Abaco Systems RXI Box IPC

Dual Core COM Express CPU Module
Fanless Design
(2) Gigabit Ethernet Connectors
Operating Temperature Range of -25°C to +65°C

RX3i CPL410 Controller

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirements
Input Power (Max) - 20 Watts
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPE400 Controller

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirements
Input Power (Max) - 20 Watts
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPL410 Controller CPU

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts, 
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RX3i CPL410 Controller CPU

Processor1.2 GHz AMD G Series Quad Core
Operating SystemVxWorks
Power requirementsInput Power (Max) - 20 Watts, 
Input Voltage (Min) - 18 VDC
Input Voltage (Max) - 30 VDC
DisplayOLED
SecuritySecure Boot and Trusted Platform Module (TPM)
MarineABS, DNV-GL, BV, LR

RXI CONTROLLER

Dual Core COM Express CPU Module
Fanless Design
(2) Gigabit Ethernet Connectors
Operating Temperature Range of -25°C to +65°C

Central Processing Units

Series:PACSystem RX3i
Product Description Rackless: CPU
RAM:64 MB
Operating System:VxWorks
Flash Memory:64 MB
Operating system:VxWorks
No. of Program blocks:768 Program block
Input Power Requirement:20 Watts
Maximum Program block size 128 KB
Display:OLED
Local display:OLED display

Panel Module

LOGIC PANEL
ANALOG SELECT
INPUT MODULE
Supply Voltage: 24 V DC
Operating Temperature: Ty 0°C to 60°C

Digital Output Module

Output Type: Digital (On/Off)
Nominal Output Voltage: 24 VDC
Output Channels: 16 discrete output channels
Total maximum current per module: 8 A
Power Supply: 24 VDC (nominal)
Power Consumption: 5 W typical
Signal Logic: TTL compatible

Digital Output Module

Output Type: Digital (On/Off)
Nominal Output Voltage: 24 VDC
Output Channels: 16 discrete output channels
Power Supply: 24 VDC (nominal)
Power Consumption: 5 W typical
Signal Logic: TTL compatible
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Analog Output Module

Nominal Output Voltage: 4-20 mA
Voltage Range: 0 to 20 mA
Output Resolution: 16-bit digital-to-analog conversion
Power Supply: 24 VDC
Output Load Resistance: 0 to 500 Ω
Power Consumption: 5 W typical
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Analog Output Module

Nominal Output Voltage: 4-20 mA
Voltage Range: 0 to 20 mA
Output Resolution: 16-bit digital-to-analog conversion
Power Supply: 24 VDC
Output Load Resistance: 0 to 500 Ω
Power Consumption: 5 W typical
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Digital Input Module

Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: 3 W typical
Input Voltage: 24 VDC
Input Current: 10 mA 
perating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Digital Input Module

Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 3 W
Input Voltage: 24 VDC
Input Current: 10 mA 
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Control Module

Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 5 W
Analog voltage: ±10 VDC
Current: 4–20 mA
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Control Module

Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 5 W
Input Types:Voltage: ±10 VDC
Input Types Current: 4–20 mA
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Analog Input Module

Signal Types Supported Voltage: ±10 VDC
Signal Types Supported Current: 4–20 mA
Accuracy: ±0.1% of full scale
Sampling Rate: 500 Hz per channel
Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 5 W

Analog Input Module

Input Channels: 16 Analog input channels
Voltage :0–10 VDC, ±10 VDC
Current: 4–20 mA
Sampling Rate: 500 Hz
Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 5 W
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Analog Input Module

Input Channels: 16 Analog input channels
Voltage :0–10 VDC, ±10 VDC
Current: 4–20 mA
Sampling Rate: 500 Hz
Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically 5 W
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Analog Input Module

Input Channels: 12 Analog input channels
Signal Type:Voltage 0-10 VDC
Current :4-20 mA
Accuracy: ±0.1% of full scale
Nominal Operating Voltage: 24 VDC
Voltage Range: 20.4 to 30 VDC
Power Consumption: Typically <6 W

Speed Protection Module

Nominal Operating Voltage: 125 VDC
Voltage Range: 85–250 VDC
Power Consumption: Typically <10W
Range: 0–100,000 RPM
Accuracy: ±0.1% of full scale
Operating Temperature:-40°C to +70°C (-40°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

Speed Protection Module

Operating Voltage:125 VDC
Voltage Range: 85–250 VDC 
Power Consumption: typically <10W
Range: 0–100,000 RPM

Embedded Controller Module

Product Type: PAMC Acoustic Monitor (Processor)
Software: ControlST V04.03.18C
Relative humidity: 5% to 95%, no-condensing
Power Requirements +32 V dc to 18 V dc
Microprocessor: Freescale Power PC (Power QUICC II PRO 667 MHz)
Memory: 256 MB DDR SDRAMs

Power Supply Module

Product Type: Power Supply Module
Nominal Rated Voltage: 24 volts DC
Input Voltage Range: 18 to 32 VDC
Input Power: 160 watts at full load
Output power: 90 watts
Location on Baseplates: Leftmost slot
DC Output: +5VDC, +12 VDC, -12 VDC

PROTECTION RELAY

369 Motor Management Relay
369 - Basic unit (no RTD)
HI-50-300 VDC / 60-265 VAC control power
R-Optional 12 RTD inputs (built-in)
M-Optional metering package
0-No optional Fiber Optic Port
E-Optional Modbus/TCP protocol interface
0-No Harsh environment option

CENTRAL PROCESSING UNIT

CENTRAL PROCESSING UNIT
64MHZ
32-BIT FLOATING
1MBYTE MEMORY
SERIES 90-70

Analog Input Terminal Board

4-20 mA current loops
0-5 V or 0-10 V DC voltage signals
Operating Temperature Range: -30°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH, non-condensing

Turbine Protection Input Terminal Board

Series: Mark VIe
Simplex Primary Turbine Protection Input Terminal Board
Number of inputs: 4
Number of outputs: 2
MPU pulse rate range: 2 Hz to 20 kHz
Contact voltage sensing: 20 V dc
Technology: Surface mount
Temperature: -30 to +65C

CPU module

Series:RX3i PacSystem
Part Number:IC695CPE305CA IC695CPE305CA-BCAD
Compatibility:PACSystems RX3i
Clock Speed:1.1 GHz
RAM:5MB
NVRAM:10MB
Serial Ports:2
Communication standards:RS232; RS485
Ethernet Port:One (1)
Maximum Program Blocks:512
Maximum Block Size:128 kilobytes
Number of Slots:1
Number of Local Racks:8
Program Storage:5 MB of User Memory
Type of Memory Storage:SRAM, Flash
Processor Speed:1.1G Hertz
Floating Point:Yes
Serial Communication:RS-232
Ethernet Port:Yes

Turbine Emergency Trip Terminal Board

Mark VI
Triple Modular Redundancy (TMR) 
Input Voltage Range: 24 VDC to 125 VDC
Operating Temperature: -30°C to +65°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing

Turbine Emergency Trip Terminal Board

3 independent trip solenoids
Solenoid voltage typically: 
24 VDC to 125 VDC
Operating Temperature: -30°C to +65°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing

Protective Termination Board

Series: Mark VI
Input Voltage:  0-10 VDC
Operating Temperature: -30°C to +65°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing

Analog Processor Module

Series: Mark VI
Function: Analog Processor Module
Input Voltage: 125 V dc
Output Voltage: 24 V dc
Operating temperature: -30 to +65oC
Mounting: DIN-rail
Model Type: Safety I/O Pack

Eight Port Serial Controller

Form Factor
PMCPCI  PMC-422 
Signaling: 3.3V and 5V
Specification 2.2
33 MHz/32-bit
3 watts total
0.3A @ 3.3V
0.4A @5V
Eight rear RS485/RS422/RS232 serial ports
Four RS232 ports on front; RJ45 connectors 
(frontports are not available for RS485 and RS422)

RTD Input Terminal Board

Function: RTD Input Terminal Board
Series: Mark VIe
Number of Channels: 8
Operating temperature: 0 to 60 o C
Input voltage: 125 V
Total Output: 400 W

Analog Input Terminal Board

Voltage Input:  ±10V, 0-10V, or 0-5V
Current Input:  4-20 mA
Nominal Supply Voltage: 24 VDC
Power Consumption:  250 mA
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing

TERMINATION BOARD

Span: 0.3532 to 4.054 V
Size: 17.8 cm high x 33.02 cm wide
Technology: Surface mount
Temperature Operating: -30 to 65oC
Product Type: Servo Terminal Board

Terminal Board

Series: Mark VI
Product Type: Terminal Board
Trip Solenoids: 3
Solenoid Rated Voltage/Current: 125 V dc
Solenoid Response Time: L/R time constant is 0.1 sec
Current Suppression: Metal oxide varistor
Control Relay Coil Voltage Supply: 28 V
Flame Detector Supply Voltage/Current: 335 V dc
Flame Detectors: 8

Sink I/O terminal block

Input voltage range: 10-30V DC
Output voltage: 24V DC typical
Input: Up to 2mA per channel
Output: Rated for up to 2A per channel
Wiring Capability:  typically 16-24 AWG
Operating Temperature: -40°C to +60°C
Humidity Tolerance: Up to 95% non-condensing

DC sink I/O terminal block

Series:Genius I/O
Voltage Ratings:12/24 Volts DC
Operating Temperature:0 to 60 degrees Celsius
Storage Temperature:-40 to 100 degrees Celsius
Relative Humidity:5%-95%, Non-condensing

Terminal block