ALL MANUFACTURERS

MSR6R/T

Power Trigger Board

POWER MODULE BOARD ASSEMBLY
Pulse Type:5-10 kHz
Pulse Amplitude: 8–15V DC
Output Channels: 6 pulses
Pulse Width:120°–180° per cycle
Supply Voltage:±15V DC 

CP341 RS422/485 Communications Processor

SITOP PSU100M Power Supply

SITOP PSU8200 20 A 
stabilized power supply 
input: 120-230 V AC 110-220 V DC
output: 24 V DC/20 A

KJ2002X1-CA1 Controller M5+ Module

KJ1501X1-BC3 System Power Supply

Input rating 
12 VDC at 14.8 A  24 VDC at 6.1 A 
Output rating
12 VDC at 13 A (12 VDC input)
12 VDC at 8 A (24 VDC input)
5.1 VDC at 2.0 A
3.4 VDC at 2.0 A
Output Power
10.2 W (total from +5.1 VDC and+3.4 VDC)
AmbientTemperature-40°C to +70°C
Vibration 1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz

KJ3001X1-BG1 Digital Output Isolated

KJ3001X1-BB1 Digital Input Module

KJ3002X1-BC1 Analog Input Module

Power Adapter Terminal Assembly

Power Input:24V DC
Current Capacity:5A max 
Operating Temperature:
-10°C to 60°C (14°F to 140°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Humidity Tolerance:5% to 95% non-condensing

Five-slot File Power Supply

TDC 3000 
Five-slot File Power Supply
Chassis Power Supply
CE-compliant
Standard 3-pin connector

Digital I/O Module

Number of I/O channels  64-channel input 
Signal isolation Common every 16-channel 
Input contact rating 5 V DC, 20 mA or more 
Input response time  8 ms (for status input)
Maximum currentconsumption 800 mA (5 V DC) 
External connection  Dedicated cable (KS9) 
Compatible card  ST6 compatible 

AC/DC 3PH PWR SPLY W/CONF-COAT

ABB AC410 Battery Pack

Drive Control Card

Series: Mark V
Operating Temperature: 0°C to +60°C.
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95%, non-condensing.
Control Functions:
Manages motor control processes.
Monitors system parameters such as voltage, current, and speed

Interface Module SS2

Flex XT 4 Point Analog Output Module

Analog Output Baseplate

Current Output: 4–20 mA
Voltage Output: Optional 0–10 V DC
Typically ±0.1% of full scale 
Current Output: 750 Ω (4–20 mA)
Voltage Output:  ≥ 1 kΩ (0–10 V)
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)

Inverter IGBT trigger board

Input Voltage:+24V DC
Turn-On Voltage: +15V ±0.5V
Turn-Off Voltage: -8V to -15V 
Switching Frequency:Up to 10–20 kHz
Optical Isolation: ≤2500 V RMS
Operating Temperature: 0°C to +70°C
Storage Temperature: -40°C to +85°C

SB171 Backup Power Supply

System PSU 115/230VAC 24Vdc 50A CC,UL508

Power requirements : 110-240 Vac
Power consumption at no load : 13 W
Input frequency range : 47-63 Hz
Storage temperature : –25°C—+85°C (–13°F—+185°F)
Operating temperature : –5°C—+70°C (23°F—+158°F)
Inrush current : < 15 A
Output voltage : 25 Vdc or 28 Vdc; dual overvoltage protection
Ripple and noise : < 40 mVpp
Hold-up time : 100 ms at full load
Output voltage setting : 25 Vdc
Efficiency at 230 Vac : >87%