Points:32, commoned
Nominal input voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum input voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Input delay:<10 ms, On to Off or Off to On
ADC scan time:<1 ms for all 32 points
Product Type : Coupling Module
Assembly kit B 9302, with switch-off of
the watchdog signal, for PES H51q
Space requirement : 4 TE
Operating data 5 V DC : 600 mA
Operating data 24 V DC : 750 mA
Output signal 4 to 20 mA
Allowable load resistance 0 to 750 Ω
Circuit-open detection Less than 0.65 mA
Accuracy ±48 µA
Data update period 10 ms
Drift due to ambient temperature change ±16 µA/10 ˚C
4 to 20 mA
16 isolated
standard switch-overresponse
in redundant configuration
1500 V AC, for 1 minute
0 to 750 Ω
Less than 0.65 mA
±48 µA
±16 µA/10 ˚C
230 mA (5 V DC)
540 mA (24 V DC)
Collector-Emitter Voltage :3300 V typical
Gate-Emitter Voltage:±20 V (max)
Continuous Collector Current :1200–1500 A
Peak Current: Up to 3000 A
Max Junction Temperature: 125–150°C
Isolation Voltage: 6–10 kV
Local Bus Power 12 VDC at 300 mA
Fieldbus Power 9 to 32 VDC at 12 mA/Port
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing IP 20 Rating
Terminal Block keyPosition D6
Input Power Rating 35 VDC @ 1A
AmbientTemperature-40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2 Hz;
0.7 g from 13.2 to 150 Hz
ContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
KJ3002X1BG2
DISCONTINUED BY MANUFACTURER
THERMOCOUPLE
MV FINAL ASSEMBLY
INPUT MODULE
8POINT
ANALOG
Tariff Code: 8538903000
Country of Origin: United Kingdom
Number of input channels: 16, isolated channels
Allowable input voltage :±5 V
Input resistance:1 MΩ or larger
Maximum currentconsumption:350 mA (5 V DC)
Measurement current:RTD: 1 mA
Resistance ofsignal source plus wiring:150 Ω or less
Input Signal:1-5 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for current loop compatibility
Response Time: <10 ms
Input Signal: 0-10 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for
current loop compatibility
Response Time: <10 ms
Coil Voltage 118 VAC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Coil Voltage 24 VDC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A (resistive load)
Temperature Range -20°C to +60°C
Humidity5% to 95% non-condensing
I/O Type
Digital or Analog Inputs/Outputs
Input Voltage Range
Typically 24 VDC or 120/240 VAC
Max Switching Current Typically 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Input Voltage Range:24 V DC
Operational Range: 15–30 V DC
Typically 2–5 mA per channel
High-Level (ON): ≥18 V DC
Low-Level (OFF): ≤5 V DC
Response Time:≤ 1 ms
Integration: Acts as a DP Slave or Master
Data Transfer Rate: Up to 12 Mbps
Max Nodes: 125 nodes per segment
Voltage: 24 V DC (±10%)
Isolation: 500 V AC
Connector: 9-pin D-sub or terminal block
Cable Length: Up to 1,200 meters
Operating Temperature Range:-40°C to 85°C
Input Voltage Range:90VAC to 264VAC
Output Voltage:DC 24V
Power Consumption:≤ 15W
Communication Interface:RS-232, RS-485
Relay Output:4 channels
LED Indicators:Status and alarm indicators
Certifications:CE, UL, CSA
