Input Voltage: Standard 24V DC
Power Consumption: Low power consumption 10W.
Operating Temperature: -10°C to +55°C
Storage Temperature: -40°C to +70°C
Humidity: 5% to 95% (non-condensing)
Protection Class: IP20 for standard industrial environments
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL244
Application:Versamax I/O and Control System
Operating Voltage:240 Volts AC
Built-in Power:Yes
Number of Inputs:8 Discrete Inputs
Channel Isolation:Yes
Location:Versamax I/O Carrier
Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Minimum Shaft Diameter 25 mm (0.79”)
Operating Temperature
Range Sensor incl. 1m Cable:-35 to +180°C (-31 to 356°F)
Cable & Connector:-35 to +150°C (-31 to 302°F)
Linear Measurement Range:2 mm (80 mils)
Initial Air Gap:0.5 mm (20 mils)
Minimum Shaft Diameter:25 mm (0.79”)
Target Material :42CrMo4
Supply Voltage: -24 V DC (±10%)
Frequency Response: 0 to 8 kHz (±3 dB)
Linearity Error: ≤ ±1% FSO (Full Scale Output)
Temperature Drift: ≤ ±0.05%/°C (compensated)
Series:Versamax
Part Number:IC200CPU001
Description:Configurable CPU
Product type:CPU module
Serial Ports:2
User Memory:34K Bytes
Product Description:Central Processing Unit (CPU)
Floating point math:Supported
Discrete Internal Bits:1024 points
Discrete Inputs:2048 points
Discrete Temporary Bits:256 points
Discrete Outputs:2048 points
Boolean Execution Speed:1.8 ms / K
Type of Memory Storage:RAM and Flash
Modbus Registers:32
Real-Time Clock Accuracy:100 ppm
Global Discrete Bits:1280 points
Floating Point data:Supported
Battery Backed RTC:Installed
Override functions:Supported
Series:VersaMax
Product Type:Compact box-style I/O carrier
No. of Terminals:36 terminal
Single-Wire Cross Section:0.36 mm2 to 2.1 mm2
Two-Wire Cross Section:Up to 0.86 mm2
Current rating per point:2 A
Voltage rating:0-264 VAC
Current per Point:2 Amps
Current rating per each power terminal:8A
Current rating, per point:2 Amperes
Voltage supply, max:264 VAC
Current rating per ground and power segment:8 Amperes
Maximum Voltage per Point;264 Volts AC
Transient voltage, max:300 VAC
Part Number/Catalog No.:1794-TB32
Product Type:Flex I/O Terminal Base Unit
Terminal Screw Torque:0.56-0.79 Nm
Supply Voltage Range max.:31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage:50V Continuous max.
Voltage Rating:24V DC/AC
SINAMICS S120 Double Motor Module
input: 600 V DC
output: 400 V 3 AC, 18 A/18 A
type of construction: booksize internal
air cooling optimized pulse patterns
and support of the extended
Safety Integrated functions
incl. DRIVE-CLiQ cable
