CONTROL PANEL
INTELLIGENT ADRESSABLE
FIRE ALARM CONTROL PANEL
120VAC
30-120WATT HIGH-EFFICIENCY AMPLIFIERS
DAY/NIGHT AUTOMATIC ADJUSTMENT
EIA-485 ANNUCIATOR
AND TERMINAL MODE PORTS
REPLACED BY CPU2-640
PC BOARD
REFLECTIVE MEMORY
PCI NODE CARD
128 MBYTE MEMORY
MULTIMODE TRANSMISSION
Low Latency, Deterministic Transfer Rates
Operating System and Bus Structure Independence
Dual-port RS-232/RS-485
Baud rates up to 115.2 kbps
Voltage Levels: ±5V to ±15V
Max Cable Length: 15m (50 ft)
Supply Voltage: 24V DC (±10%)
Power Consumption: 3W typical
Power Supply: 28 VDC
Communication Ports: Ethernet, Serial
Operating Temperature: -40°C to +70°C
Storage Temperature: -55°C to +85°C
Humidity: 5–95% non-condensing
Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485
Nominal Rated Voltage:24VDC / 48VDC
Input Voltage Range, DC:Start: 21 to 56 VDC Run: 18 to 56 VDC
Voltage:24 Volts DC
Standard:UL, CE
Full load power rating:50 Watts
Velocity: 0–20 mm/s
Displacement: 0–500 µm
Frequency Range:10 Hz – 10 kHz
A/D Resolution:16-bit
Sampling Rate:Up to 50 kHz
Power Supply:24V DC
Power Consumption:5W typical
Accessory Boards:8 Boards
Ambient Temperature Rating:-30 to 65 Degrees Celsius
Base Circuitry Coating:Special Protection
Assembly Type:IS220 Standard Modular
Chassis Style:Rough Vented
Port Styles:2 Ethernet (Pictured)
Operating temperature: -30 to 65oC
Power Supply Voltage: 24 V dc
Number of channels: 6
Input span: 4-20 mA
Termination resistors: 121 Ohm
Technology: Surface Mount
Common Mode Voltage Range: ±5 V
Maximum Lead Resistance: 15Ω
Analog output current: 0-20 mA
Operating temperature: -30 to 65 °C
Operating Voltage:85–265V AC/DC
Nominal: 120/208V
Maximum: 690V AC
Burden: <0.2VA per phase
Standard CTs: 1A or 5A
Burden: <0.1VA at 5A
Voltage/Current: ±0.2% of reading
Power/Energy: ±0.5%
Frequency: ±0.01Hz
Input Voltage:24V DC (±10%)
Power Consumption:15W (typical)
Isolation Voltage:1500V AC
Analog Inputs:±10V
Control Bandwidth:1kHz (typical)
Resolution:16-bit
Update Rate:62.5μs (16kHz)
Series:Mark VI Speedtronic
Functional Acronym:BPPB
Input Voltage: 24V DC
Output Voltages:+5V DC @ 20A max
Efficiency: >90% typical
Ripple: <50mV p-p on all outputs
Multi-Voltage Power Distribution: Provides +5V, ±15V
Input Voltage:24 V DC
Output Voltage:±15 V DC or +5 V DC
Output Current:Up to 10 A
Power Rating:120–150 W
Efficiency:≥85% (typical)
Ripple & Noise:<1% of output voltage
Voltage Regulation:±1% (line and load)
Firing Angle Range:0–180°
Synchronization:3-phase AC input
Pulse Output:8–12 channels
Accuracy:±0.5° firing angle resolution
Isolation :2500V AC
Power Supply:+5V DC
Input Channels:32 optically isolated inputs
Input Type: 24–125V DC
Voltage Range:24V DC
Input Current :5–15mA per channel
Isolation :1500V AC
Response Time:≤10ms (ON/OFF)
Power Supply:+5V DC
Input Channels:3-phase voltage
Voltage Range:0–150V AC
Frequency Range:45–65Hz
Accuracy:±1% of full scale
Response Time:<2 cycles
Isolation:2500V AC
Power Supply:+5V DC
Supply Voltage: +24 V DC
Power Consumption: ≤15 W
Isolation Voltage: 1500 V AC
Voltage Range: 24–125 V DC
Current Rating: Up to 5 A per channel
Switching Speed: ≤10 ms
TRIP CONTROL CARD
PC BOARD SDCC MARK V SYSTEM
Analog Trip Signals: 4–20 m
Digital Trip Signals: 24 VDC
Aux Relay (K2): Alarm/status outputC
Resolution: 0.1% of setpoint
Accuracy: ±0.25% FS
Voltage: +24 VDC (±10%)
Consumption: 15 W (max)
Type:Scanner module
Speed:100 Mbps
Material:Multi-mode fiber (MMF)
Length:2 Kilometers
SD Card:Supported
Power:3.3 to 5 Volts
Port Connectors:Two RJ-45 and two SFP cages.
LED Indicators:Yes
Series: GE Mark VIe Series
Input Voltage: 24 V DC (±10%)
Power Consumption: ≤8 W
Voltage Range:0–30 V DC or 0–120 V AC
Range: 0–10 V DC, 4–20 mA
Resolution: 16-bit ADC
Type: Form-C contact relays (1 A at 30 V DC)
Operating Temperature: -40°C to +70°C
Relative Humidity: 5–95% (non-condensing)
Series: GE Mark VIe Series
Input: 24 V DC (±10%)
Isolation: ≥1.5 kV
Digital Inputs:0–30 V DC
Analog Resolution:16-bit ADC
Operating Temperature: -40°C to +70°C
Shock/Vibration: to 5 G (5–500 Hz)
