
























ControlLogix analog input module
Series:ControlLogix
Channels:8 Isolated Channels
Module Type:Analog Input
I-O Ranges:0-10 Volts
Inputs:8-Points, Isolated ,
Any combination of Voltage or Current mode
Conversion Method:Sigma-Delta
Current Draw (5.1 Volts):200 milliamps
PowerFlex Air Cooled 753 AC Drive
AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20
OPEN TYPE
400 VAC / 540 VDC
7.5 KW / 10 HP
15.4 AMP
FILTERING
JUMPER REMOVED
INTERNAL TRANSISTOR
NO HIM
PowerFlex Air Cooled 753 AC Drive
PowerFlex 753 AC Drive
with Embedded I/O
Air Cooled AC Input with DC Terminals
Open Type/Frame 1
400V AC, 3PH, 11.5A
5.5kW Normal Duty
4kW Heavy Duty
Frame 1, Filtered
CM Jumper Removed
DB Transistor, No HIM
PowerFlex Air Cooled 753 AC Drive
Voltage Class:600 AC Volts
Output Current:52 Amperes
Phase Count:Three
Frame Size:5
Enclosure Type:IP00 (IP20 NEMA)
EMC Filtering Options:Filtered, No CM Jumper
Input Type:AC Input with DC Terminals
Dynamic Breaking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:8 Amps,
(Fr1 5HP ND, 3HP HD/Fr2 5HP ND, 5HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:5 Amps,
(Fr1 3HP ND, 2HP HD/Fr2 3HP ND, 3HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:3.4 Amps,
(Fr1 2HP ND, 1.5HP HD/Fr2 2HP ND, 2HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:2.1 Amps,
(Fr1 1HP ND, 0.5HP HD/Fr2 1HP ND, 1HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:96 Amps, 75HP ND, 60HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 5
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 00 mm
Minimum case length: 80 mm
50 5.0 meters (16.4 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 00 mm
Minimum case length: 80 mm
05 0.5 meter (1.6 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 00 mm
Minimum case length: 160 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 00 mm
Minimum case length: 100 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 00 mm
Minimum case length: 180 mm
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 00 mm
Minimum case length: 50 mm
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 0 mm
Minimum case length: 110 mm
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
3300 XL 8 mm Proximity Probes
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 0 mm
Minimum case length: 80 mm
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.9 in
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 0.6 in
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
00 Not required
Velomitor Interconnect Cable
2-conductor twisted
shielded 22 AWG armored cable
with 2- socket moisture-resistant
female connector at one end
terminal lugs at the other end
3300 XL 11 mm Proximity Probes
330704 3300 XL 11 mm Probe
M14 x 1.5 thread,with armor
Minimum unthreaded length:0 mm
Minimum length:100 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
Standard Interconnect Cables
2-conductor twisted
shielded 22AWG (0.5 mm2) cable
with 2-socket moisture-resistant femaleconnector at one end
terminallugs at the other end
(used withmonitors or vibration datacollectors)
Cable operating temperature is-50˚C to 120˚C
Minimum length of 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)
Interconnect Cable
2-conductor 18 AWG twisted
shielded cable with right angle
2- socket plug at one end
terminal lugs at the other end
3300 XL 8 mm Proximity Probes:
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.8 in
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
Analog current loops at 4-20 mA
Input/Output: 4–20 mA
Resolution: 12–16 bits
Typical Accuracy: ±0.1% of full scale at 25°C.
Temperature Drift: ±0.02% per °C
Voltage: 24 VDC nominal
Power Consumption: ≤5 W
Channel-to-Channel Isolation: ≤1500 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 0–95% non-condensing.
Vibration Resistance: 5–2000 Hz, 5 g RMS

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.