

























Maintaining the health of your critical rotating machinery depends on the integrity of your monitoring systems. This page offers a complete inventory of Bently Nevada components, essential for ensuring your Turbine Supervisory Instrumentation (TSI) operates flawlessly. Access to the correct TSI spare parts is the key to preventing costly, unplanned downtime and maintaining operational safety. We provide a full spectrum of new and obsolete Bently Nevada parts to keep your most valuable assets protected and productive.
The accuracy of any machinery protection system starts with its sensors. Our inventory includes a vast selection of TSI sensors engineered for precision and resilience in demanding industrial settings. A cornerstone of any TSI system is the Bently Nevada 3300 XL 8mm Proximity Sensor (330101-00-10-05-02-00). This non-contacting transducer leverages eddy current technology to deliver exceptionally accurate measurements of shaft vibration and axial position. The quality of this data is fundamental to all machinery health analysis. Using genuine Bently Nevada sensors guarantees that your monitoring modules receive clean, reliable signals, which is non-negotiable for effective asset protection.
The Bently Nevada 3500 system is the global standard for machinery protection, and we stock the critical I/O modules required to maintain its peak performance. A key component available here is the 3500/42M Proximitor/Seismic Monitor (3500/42M-01-00-00). This powerful four-channel module processes signals from both proximity and seismic sensors, providing continuous protection by comparing real-time data against configured setpoints.
For deeper diagnostic insights, the 3500/25 Enhanced Keyphasor Module (3500/25-01-02-00) is indispensable. A Keyphasor sensor provides a once-per-turn timing reference that is crucial for synchronous data analysis. This module conditions the signal, enabling your analysts to accurately diagnose complex faults such as imbalance and misalignment. Beyond these, we stock specialized modules, including various gas turbine cards, to support the unique requirements of specific machine applications.
Connecting machinery protection data with plant-wide control systems requires robust and reliable communication hardware. The 3500/92 Communication Gateway (3500/92-01-01-00) is designed specifically for this task. The 3500 monitoring system is a trusted solution for continuous online surveillance and protection of critical rotating machinery. It tracks key parameters such as vibration, position, and temperature to detect early signs of equipment issues, reduce unplanned downtime, and support reliable, long-term operation across industrial facilities.
Browse our extensive inventory to find the exact Bently Nevada component for your needs. Whether you are performing routine maintenance, planning a system upgrade, or responding to an urgent outage, having access to high-quality spares is critical. Our stock covers new, and hard-to-find parts for systems including the 3300, 3500, and more. If you cannot locate a specific component or require assistance with compatibility, our expert team is ready to help you source the right solution quickly.

3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 0 mm
Minimum case length: 60 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 25 mm Proximitor Sensor
3300 XL 25 mm Proximitor Sensor
9 0 9.0 metres (29.5 feet) systemlength
panel mount
0 0 No Approvals
3300 XL 8 mm Reverse Mount Probes
330105-02-12-CC-DD-EE3/8-24 UNF threads
50 5.0 meters (16.4 feet)
02 Miniature ClickLoc coaxialconnector
00 Not required
3300 XL 8 mm Reverse Mount Probes
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 0 mm
Minimum case length: 80 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 8 mm Reverse Mount Probes
3300 XL 8 mm Reverse Mount Probes
30105-02-12-CC-DD-EE3/8-24 UNF threads
05 0.5 meter (1.6 feet)
02 Miniature ClickLoc coaxial connector
05 CSA, ATEX, IECEx Approvals
Transient Data Interface I/O Module
14603101
GENERAL ELECTRIC
BENTLY NEVADA
I/O MODULE
TRANSIENT DATA INTERFACE
Shaft Absolute I/O Module
(4) Channel Monitor
Accepts Input from Proximity and Seismic Transducers
Machinery Protection
Provides Essential Machine Information
3500/42M Series Proximitor / Seismic Monitors
Ethernet/RS232 Modbus I/O Module
Accepts from 1 to 16 signals
Input impedance: Greater than 1 MΩ
Power consumption: 3 watts
Front panel LEDs: OK, TX/RX, Bypass
Type E, J, K, T thermocouples
100 Ω 3-wire and 4-wire platinum RTD
Low Voltage dc Power Input Module
Description
Low Voltage DC Power Supplyand
the Low Voltage DC Power Supply Input
Module (PIM)
Inputvoltage 20 to 30 Vdc
Half-Height Future Expansion Faceplate
3500/25 Series
Half-height
(2) Channels
Input Signals:
Proximity Probes
or Magnetic Pickups
Proximitor I/O Module
12822901
PROX/SEISMEC I/O MODULE
INTERNAL TERMINATIONS
SEISMOPROBE
Keyphasor I/O Module
12580001
DISCONTINUED BY MANUFACTURER
I/O MODULE
KEYPHASOR
INTERNAL TERMINATION
FOR 3500/25 CONDITION MONITORING SYSTEM
Spare 4-Channel Relay Output Module for standard systems
12572002
3500/32 3500 4-CHANNEL RELAY
REPLACE 125720-01
Communication Gateway
350092
DISCONTINUED BY MANUFACTURER
COMMUNICATION MODULE
250 VAC
GATEWAY
SURPLUS
I/O MODULE
Position Monitor Module
350045
GENERAL ELECTRIC
BENTLY NEVADA
DIFFERENTIAL EXPANSION THRUST MONITOR
AVAILABLE
REBUILD SURPLUS
NEW
NEVER USED
REPAIR YOURS
24 HOUR RUSH REPAIR
5-10 DAY REPAIR
2 YEAR RADWELL WARRANTY
Proximity/Seismic Monitor Module
350042M
DISCONTINUED BY MANUFACTURER
PROXIMITOR / SEISMIC MONITOR MODULE
4 CHANNEL
4-Channel Relay Module
Power Consumption:5.8 Watts typical
EnvironmentalSealing:Epoxy-sealed
Arc Suppressor:250 Vrms, installed asstandard
Contact Life:100,000 cycles @ 5 A, 24 Vdcor 240 Vac
Maximum switchedcurrent :2 A @ 0V to 30 Vdc
Spare 4-Channel Relay ControlModule
AC Power Supply Module
350015
POWER SUPPLY MODULE
1.9/7.5 AMP
95-125 VAC
190-250 VAC
47/63 HZ
Maintaining the health of your critical rotating machinery depends on the integrity of your monitoring systems. This page offers a complete inventory of Bently Nevada components, essential for ensuring your Turbine Supervisory Instrumentation (TSI) operates flawlessly. Access to the correct TSI spare parts is the key to preventing costly, unplanned downtime and maintaining operational safety. We provide a full spectrum of new and obsolete Bently Nevada parts to keep your most valuable assets protected and productive.
The accuracy of any machinery protection system starts with its sensors. Our inventory includes a vast selection of TSI sensors engineered for precision and resilience in demanding industrial settings. A cornerstone of any TSI system is the Bently Nevada 3300 XL 8mm Proximity Sensor (330101-00-10-05-02-00). This non-contacting transducer leverages eddy current technology to deliver exceptionally accurate measurements of shaft vibration and axial position. The quality of this data is fundamental to all machinery health analysis. Using genuine Bently Nevada sensors guarantees that your monitoring modules receive clean, reliable signals, which is non-negotiable for effective asset protection.
The Bently Nevada 3500 system is the global standard for machinery protection, and we stock the critical I/O modules required to maintain its peak performance. A key component available here is the 3500/42M Proximitor/Seismic Monitor (3500/42M-01-00-00). This powerful four-channel module processes signals from both proximity and seismic sensors, providing continuous protection by comparing real-time data against configured setpoints.
For deeper diagnostic insights, the 3500/25 Enhanced Keyphasor Module (3500/25-01-02-00) is indispensable. A Keyphasor sensor provides a once-per-turn timing reference that is crucial for synchronous data analysis. This module conditions the signal, enabling your analysts to accurately diagnose complex faults such as imbalance and misalignment. Beyond these, we stock specialized modules, including various gas turbine cards, to support the unique requirements of specific machine applications.
Connecting machinery protection data with plant-wide control systems requires robust and reliable communication hardware. The 3500/92 Communication Gateway (3500/92-01-01-00) is designed specifically for this task. The 3500 monitoring system is a trusted solution for continuous online surveillance and protection of critical rotating machinery. It tracks key parameters such as vibration, position, and temperature to detect early signs of equipment issues, reduce unplanned downtime, and support reliable, long-term operation across industrial facilities.
Browse our extensive inventory to find the exact Bently Nevada component for your needs. Whether you are performing routine maintenance, planning a system upgrade, or responding to an urgent outage, having access to high-quality spares is critical. Our stock covers new, and hard-to-find parts for systems including the 3300, 3500, and more. If you cannot locate a specific component or require assistance with compatibility, our expert team is ready to help you source the right solution quickly.

Copyright Notice © 2004-2026 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.