
PROFIBUS Redundancy Link Module
Supply Voltage:24V DC (±10%)
Power Consumption:3W (typical)
Isolation :1500V AC
Protocol:PROFIBUS DP-V1
Data Rate:9.6kbps
Max Nodes:32 per segment
3300 Proximitor Sensor
Product type : 3300 Proximitor Sensor
Total Length Option : 50 = 5.0 metres (16.4 feet)
Agency Approval Option : 03 = Multiple Approvals
Proximitor® Sensor Material : A383 aluminum.
Operating Temperature : -51°C to +100°C (-60°F to +212°F)
Storage Temperature : -51°C to +100°C (-60°F to +212°F)
Transformer Protection
Supply Voltage:24V DC (±10%)
Power Consumption:3W (typical)
Isolation :1500V AC
Protocol:PROFIBUS DP-V1
Data Rate:9.6kbps
Max Nodes:32 per segment
Transformer Protection
Rated Current:1A or 5A
Voltage Inputs:100-240V AC
Burden:<0.2VA (current)
Current (0.1-40In):±0.5%
Voltage:±0.2%
Frequency:±0.01Hz
Operating range: 1.05-1.4 pu V/Hz
Control Card
Operating Voltage: 24V DC
Power Consumption: < 5W
Analog I/O (if applicable):0-10V, 4-20mA
Analog Input Board
Input Channels:16
Input Types:4-20mA
Resolution:16-bit (0.0015% FS)
Accuracy:±0.1% FS
Update Rate:100ms (all channels)
Isolation Voltage:1500V AC
Overvoltage:30V continuous
Surge Protection:4kV
LV AC industrial wall-mounted single drive
3AUA0000090441
ACS880-01-096A-5
PN: 55 kW, IN: 96 A
LV AC industrial wall-mounted single drive
IEC: Pn 55 kW, 96 A, 500 V
UL: Pld 75 Hp, 96 A, 460 V
LV AC industrial wall-mounted single drive
ACS880-01-040A-5
3ABD00037851-D
Type Designation:ACS880-01-040A-5
LV AC industrial wall-mounted single drive
IEC: Pn 22 kW, 40 A (ACS880-01-040A-5)
PN: 22KW, IN: 40A
LV AC industrial wall-mounted single drive
ACS880-01-04A8-5
3AUA0000090430
LV AC industrial wall-mounted single drive
IEC: Pn 2.2 kW, 4.8 A, 500 V
UL: Pld 3 Hp, 4.8 A, 460 V
PN: 2.2 kW, IN: 4.8 A
(ACS880-01-04A8-5)
LV AC industrial wall-mounted single drive
ACS880-01-021A-5
3AUA0000090435
LV AC industrial wall-mounted single drive
IEC: Pn 11 kW, 21 A, 500 V
UL: Pld 15 Hp, 21 A, 460 V
PN: 11.0 kW, IN: 21 A
(ACS880-01-021A-5)
3300 35mm Series Proximitor
Continuous, Online Monitoring
Temperature, Pressure, and Overspeed Detection
Vibration and Position Monitoring
Designed for Machine Protection
Versatile, Expandable, and Cost-Effective
Condition Monitoring Board
Dynamic range: 0–10 kHz
Filters: High-pass
Power Supply:+24V DC (±10%), 2A typical
Input Voltage Range:±50V (protected inputs)
A/D Resolution:16-bit (typical)
Sampling Rate:Up to 100 kS/s (per channel)
PC BOARD ASSEMBLY
Main Processor:216MHz
Memory:512MB DDR3
A/D Conversion:16-bit, 1μs sampling
Analog Inputs:12x (±10V/4-20mA, 16-bit)
Digital I/O:24x (24V DC, opto-isolated)
Communication Ports 2x RS-485
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.